SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)
Oil-Free Vacuum Pump for Plastics & PET Extrusion in Middle East
Oil-Free Vacuum Pump sized for hopper loading, PET drying air and vacuum sizing — 300–2,000 m³/hr at vacuum and pressure — and built for the Middle East grid, climate and shipping route.
Oil-Free Vacuum Pump demand for plastics and PET extrusion in Middle East is real and growing; the engineering question is only whether the machine holds its vacuum through local conditions and arrives without a three-month lead time. The plastics and PET extrusion job is hopper loading, PET drying air and vacuum sizing. Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure.
Power in Middle East is 50 Hz / 380–415 V (3-phase); confirm the exact site voltage and the oil-free dry vacuum pump hits its rated duty on your supply. Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. Below are the oil-free dry vacuum pumps that fit — YBDVP 60, YBDVP 100, YBDVP 160 — with the specs, vacuum and flow figures you need to choose. Send your duty point to confirm.
MDLRecommended models
Oil-Free Vacuum Pump — the fit for plastics and PET extrusion
Clean dry vacuum for central resin conveying headers and extruder vacuum-vent duty where an oil pump would foul on volatiles.
Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Middle East
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Single-phase
- 220–240 V
- Incoterms
- CIF Jebel Ali (or FOB Nhava Sheva)
- Ports
- Jebel Ali · Dammam · Jeddah · Hamad · Sohar
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.
Sewage & STP aeration
Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.
Desalination & water treatment support
Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.
Aquaculture
Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.
Construction & cement
Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.
FAQOil-Free Vacuum Pump for Plastics & PET Extrusion — FAQs
Will the Oil-Free Vacuum Pump run on Middle East power?
Yes. Units for Middle East are wound for 50 Hz at 380–415 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
What about spares and lead time for a Middle East order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Middle East that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
RFQ / Request for Quotation
Oil-Free Vacuum Pump for Plastics & PET Extrusion in Middle East?
Send your duty point (300–2,000 m³/hr at vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).