SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)
Oil-Free Vacuum Pump for Pharma & Medical in Middle East
Oil-Free Vacuum Pump sized for oil-free de-dusting, powder conveying and central vacuum — 25–200 m³/hr at 100–850 mbar vacuum — and built for the Middle East grid, climate and shipping route.
For a pharma and medical manufacturing plant in Middle East, the oil-free dry vacuum pump is the component the process leans on — and Yash builds it to the 100–850 mbar vacuum band the job needs, not to a generic datasheet. Get the pharma and medical manufacturing sizing right and the rest is easy: the duty is oil-free de-dusting, powder conveying and central vacuum, the window is 25–200 m³/hr / 100–850 mbar vacuum, and No oil in the pumping chamber means no carryover into product or cleanroom air — the default requirement for GMP duty.
Power in Middle East is 50 Hz / 380–415 V (3-phase); confirm the exact site voltage and the oil-free dry vacuum pump hits its rated duty on your supply. Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. Start with YBDVP 25 and move up or down the range as the duty demands; the full recommended set is YBDVP 25, YBDVP 60, YBDVP 100.
MDLRecommended models
Oil-Free Vacuum Pump — the fit for pharma and medical manufacturing
The default for pharma — oil-free dry vacuum for tablet and capsule de-dusting, powder conveying, filtration and central vacuum, with no oil in the chamber.
No oil in the pumping chamber means no carryover into product or cleanroom air — the default requirement for GMP duty. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Middle East
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Single-phase
- 220–240 V
- Incoterms
- CIF Jebel Ali (or FOB Nhava Sheva)
- Ports
- Jebel Ali · Dammam · Jeddah · Hamad · Sohar
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.
Sewage & STP aeration
Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.
Desalination & water treatment support
Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.
Aquaculture
Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.
Construction & cement
Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.
FAQOil-Free Vacuum Pump for Pharma & Medical — FAQs
Will the Oil-Free Vacuum Pump run on Middle East power?
Yes. Units for Middle East are wound for 50 Hz at 380–415 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
What about spares and lead time for a Middle East order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Middle East that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
RFQ / Request for Quotation
Oil-Free Vacuum Pump for Pharma & Medical in Middle East?
Send your duty point (25–200 m³/hr at 100–850 mbar vacuum), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).