SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
High Pressure Blower for Plastics & PET Extrusion in United States
High Pressure Blower sized for hopper loading, PET drying air and vacuum sizing — 300–2,000 m³/hr at vacuum and pressure — and built for the United States grid, climate and shipping route.
A high-pressure centrifugal blower exported to United States for plastics and PET extrusion has to do two jobs at once: hold its duty point on local power, and survive the conditions on site. Because plastics and PET extrusion is hopper loading, PET drying air and vacuum sizing, the machine must hold its duty continuously — 300–2,000 m³/hr at vacuum and pressure — not just touch it on a test bench.
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Grid is 60 Hz, 208 / 230 / 460 V (3-phase), and the shipment clears FOB Nhava Sheva or CIF US ports. Start with YBCB-HP-919-4.0 and move up or down the range as the duty demands; the full recommended set is YBCB-HP-919-4.0, YBCB-HP-919-5.5, YBCB-HP-919-7.5.
MDLRecommended models
High Pressure Blower — the fit for plastics and PET extrusion
High-volume air for blown-film air rings, de-dusting and post-cutter cooling where flow matters and static must still be held.
| Model | Power | Air flow | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|
| YBCB-HP-919-4.0 | 4KW/5 HP | 1174-2062 m3/hr | 4003-4447 PA | 95 | 87 |
| YBCB-HP-919-5.5 | 5.5KW / 7.5 HP | 2500-3750 m3/hr | 3852-3407 PA | 95 | 108 |
| YBCB-HP-919-7.5 | 7.5KW/10 HP | 3130-3680 m3/hr | 4910-4776 PA | 98 | 133 |
Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQHigh Pressure Blower for Plastics & PET Extrusion — FAQs
Why a High Pressure Blower for plastics and PET extrusion rather than another machine?
Because plastics and PET extrusion is hopper loading, PET drying air and vacuum sizing, the high-pressure centrifugal blower is the right machine class for the vacuum and pressure duty — it holds the point continuously without being an oversized compromise. Models YBCB-HP-919-4.0, YBCB-HP-919-5.5, YBCB-HP-919-7.5 cover the usual range.
How do I get a firm price for a High Pressure Blower into United States?
Send five things: the duty point (flow and pressure), the site voltage and phase, the quantity, the destination port and your preferred Incoterms. We confirm the 60 Hz model from YBCB-HP-919-4.0, YBCB-HP-919-5.5, YBCB-HP-919-7.5, the CIF price, the lead time and the container loading — a quote in 24 hours.
RFQ / Request for Quotation
High Pressure Blower for Plastics & PET Extrusion in United States?
Send your duty point (300–2,000 m³/hr at vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.