SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)
High Pressure Blower for Plastics & PET Extrusion in Middle East
High Pressure Blower sized for hopper loading, PET drying air and vacuum sizing — 300–2,000 m³/hr at vacuum and pressure — and built for the Middle East grid, climate and shipping route.
A high-pressure centrifugal blower exported to Middle East for plastics and PET extrusion has to do two jobs at once: hold its duty point on local power, and survive the conditions on site. In plastics and PET extrusion, the high-pressure centrifugal blower carries the hopper loading, PET drying air and vacuum sizing load — 300–2,000 m³/hr at vacuum and pressure is the band most sites land in.
Into Middle East, orders route CIF Jebel Ali (or FOB Nhava Sheva) to Jebel Ali, on 50 Hz / 380–415 V (3-phase) builds. Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. Recommended fits are YBCB-HP-919-4.0, YBCB-HP-919-5.5, YBCB-HP-919-7.5; send flow, pressure, site voltage and destination port and the quote comes back firm.
MDLRecommended models
High Pressure Blower — the fit for plastics and PET extrusion
High-volume air for blown-film air rings, de-dusting and post-cutter cooling where flow matters and static must still be held.
| Model | Power | Air flow | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|
| YBCB-HP-919-4.0 | 4KW/5 HP | 1174-2062 m3/hr | 4003-4447 PA | 95 | 87 |
| YBCB-HP-919-5.5 | 5.5KW / 7.5 HP | 2500-3750 m3/hr | 3852-3407 PA | 95 | 108 |
| YBCB-HP-919-7.5 | 7.5KW/10 HP | 3130-3680 m3/hr | 4910-4776 PA | 98 | 133 |
Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Middle East
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Single-phase
- 220–240 V
- Incoterms
- CIF Jebel Ali (or FOB Nhava Sheva)
- Ports
- Jebel Ali · Dammam · Jeddah · Hamad · Sohar
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.
Sewage & STP aeration
Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.
Desalination & water treatment support
Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.
Aquaculture
Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.
Construction & cement
Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.
FAQHigh Pressure Blower for Plastics & PET Extrusion — FAQs
Is the High Pressure Blower rated for continuous plastics and PET extrusion duty?
Yes — the recommended YBCB-HP-919-4.0, YBCB-HP-919-5.5, YBCB-HP-919-7.5 are dynamically balanced and built for the 24/7 load that plastics and PET extrusion runs. The duty here is hopper loading, PET drying air and vacuum sizing at 300–2,000 m³/hr / vacuum and pressure; the machine is selected to hold that point continuously, not just touch it on a test bench.
How is a High Pressure Blower sized for plastics and PET extrusion?
Sizing turns on two numbers — flow and pressure. Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. On this duty most selections sit around 300–2,000 m³/hr at vacuum and pressure. Fix the duty point, add a design margin, and pick the smallest model that covers both; YBCB-HP-919-4.0 and YBCB-HP-919-5.5 are the usual starting points.
RFQ / Request for Quotation
High Pressure Blower for Plastics & PET Extrusion in Middle East?
Send your duty point (300–2,000 m³/hr at vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).