01 / Family
High Pressure Centrifugal Blower (YBCB-HP-919)
High-static-pressure air for weld-fume extraction and paint booths.
CLAutomotive & Engineering
Sector solution / Sheet-metal & auto systems
Air & Vacuum for the Automotive & Engineering Sector
Sheet-metal and auto-system makers run stamping, welding and painting at scale — a combination that leans on vacuum for panel handling and centrifugal air for fume and paint.
JBM Group
CTXWhat this sector runs
Stamping and welding shops throw fume and spatter that extraction air has to pull clear of operators, and the paint line needs high-pressure supply and exhaust for booths. These are continuous, high-static-pressure centrifugal duties that define the shop's air budget.
The defining vacuum duty is panel handling — press-line de-stacking, robotic pick-and-place and fixture hold-down of large sheet-metal parts. That wants vacuum that holds under rapid cycling and, ideally, blow-off to release parts cleanly. The recommended split is centrifugal air for weld and paint, vacuum for panel handling.
SOLRecommended Yash families
Our standard solution for the automotive & engineering sector
ENGEngineering notes
Static pressure across a big weld shop
Ducted fume extraction over a large weld shop carries real resistance — long runs, bends and loading filters — and airflow only holds if the blower has the static pressure to push through it. A low-pressure fan stalls as the system resists; a high-pressure centrifugal holds airflow across the duct's whole length. Sizing from the total system resistance, not just the hood airflow, is what keeps fume moving away from operators through a full shift, and it is the basis of the HP-centrifugal recommendation here.
Grip and release on panel handling
Robotic and press-line panel handling needs vacuum that grips hard and releases cleanly, fast. Pure vacuum grips but can be slow to let go; a shot of blow-off strips the panel off the cups instantly. Pairing a YELV pump for the handling header with a YBVP machine where quick release matters covers both, sized to the panel area and cycle rate. That combination keeps a fast press line from being paced by a sticky vacuum cup.
A supplier's uptime is the OEM's
For a tier-one sheet-metal supplier, a stoppage does not stay in-house — it propagates to the OEM's line, so the air machinery behind welding and panel handling has to be serviced without delay. That makes the domestic spares chain and quick rebuilds part of the specification, alongside sizing extraction from real ductwork resistance and handling vacuum for fast grip-and-release. Keeping a spare on the shelf and standardising families means a worn machine is back in days. On work where the customer's line depends on yours, machinery chosen for how quickly it recovers is as important as the duty it was chosen to do.
REQTypical duty requirements
Air & vacuum on a sheet-metal line
| Duty | Character | Recommended class |
|---|---|---|
| Weld-shop fume extraction | Continuous suction | Centrifugal blower |
| Paint-booth supply / exhaust | High-pressure air | HP centrifugal |
| Press de-stacking / pick-place | High-cycle vacuum | Vacuum pump |
| Fixture hold-down | Vacuum + blow-off | Dry vacuum pump |
JBM Group is a valued customer of Yash Blowers. Product recommendations on this page describe our standard solutions for the automotive & engineering sector, not that company's specific installations.
WHYWhy Yash Blowers
A tier-one supplier's uptime is its OEM's uptime, so its air machinery must be serviced without delay. Yash Blowers builds in Faridabad, since 1998, to ISO 9001:2015, with impellers cast and balanced in-house and 300+ daily dispatch — putting weld-fume blowers and panel-handling vacuum on a fast Indian spares chain.
- Faridabad, India
- ISO 9001:2015
- In-house impellers
0+
Years building blowers
0+
Units dispatched daily
0%
Impellers cast in-house
FAQFrequently asked questions
What vacuum suits robotic panel handling?
Vacuum that holds through rapid cycles and releases cleanly. The recommendation pairs a YELV pump for the handling header with a YBVP oil-free machine where blow-off is needed to strip parts off the cups.
Why high-pressure centrifugal for weld-fume?
Because ducted extraction across a big weld shop needs static pressure to overcome the ductwork and filters. A high-pressure centrifugal blower holds airflow against that resistance where a low-pressure fan would stall.
RFQ / Request for Quotation
Sizing air or vacuum for automotive & engineering?
Send your duty point — flow and pressure, or the vacuum you need — and an engineer sizes the right model and quotes ex-works Faridabad, FOB Nhava Sheva or CIF your port.