SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
Side Channel Blower for Vacuum Conveying in United States
Side Channel Blower sized for dilute-phase pneumatic vacuum conveying — 200–1,050 m³/hr at 150–500 mbar vacuum — and built for the United States grid, climate and shipping route.
Specifying a side channel blower for vacuum conveying in United States comes down to one thing: matching the machine to the duty, then building it for the grid and climate it will actually run on. This is a dilute-phase pneumatic vacuum conveying duty: Line length and vertical lift set the vacuum; conveying rate sets the airflow. Deeper vacuum keeps material entrained to the receiver.
For United States, Yash winds the motor for 60 Hz at 208 / 230 / 460 V (3-phase). Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Models such as YEBL-1-320V, YEBL-1-530, YEBL-1-700 cover this duty; send the exact flow and pressure and an engineer confirms the YEBL-1-320V or the size next to it.
MDLRecommended models
Side Channel Blower — the fit for vacuum conveying
The default vacuum source for short-to-medium dilute-phase conveying in the 150–350 mbar range — one impeller, one filter to service.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (mbar) | Pressure (mbar) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YEBL-1-320V | 4.0 HP | 320 | 188 | -270 | 290 | 69 | 37 |
| YEBL-1-530 | 7.5 HP | 530 | 312 | -300 | 320 | 80 | 62 |
| YEBL-1-700 | 7.5 HP | 700 | 412 | -200 | 180 | 81 | 66 |
Line length and vertical lift set the vacuum; conveying rate sets the airflow. Deeper vacuum keeps material entrained to the receiver. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQSide Channel Blower for Vacuum Conveying — FAQs
Will the Side Channel Blower run on United States power?
Yes. Units for United States are wound for 60 Hz at 208 / 230 / 460 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
What about spares and lead time for a United States order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For United States that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
RFQ / Request for Quotation
Side Channel Blower for Vacuum Conveying in United States?
Send your duty point (200–1,050 m³/hr at 150–500 mbar vacuum), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.