SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)
Rotary Vane Vacuum Pump for Textile in Middle East
Rotary Vane Vacuum Pump sized for pneumafil suction, fibre transport and humidification air — 1,200–6,000 m³/hr at moderate, high-flow — and built for the Middle East grid, climate and shipping route.
When a textile spinning and weaving contractor in Middle East asks Yash for a rotary vane / liquid-ring vacuum pump, the quotation starts from the duty point and the 50 Hz supply — never from a catalogue number picked by guesswork. This is a pneumafil suction, fibre transport and humidification air duty: The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping.
Shipped to Middle East, the unit is built for 50 Hz / 380–415 V (3-phase) and moves CIF Jebel Ali (or FOB Nhava Sheva). Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. The recommended models are YELV-500, YELV-650, YELV-1000; each is dynamically balanced for the continuous duty textile spinning and weaving runs, and each ships with test certificates on request.
MDLRecommended models
Rotary Vane Vacuum Pump — the fit for textile spinning and weaving
Point-of-use vacuum for slasher-size boxes, dewatering and fixed machine-cleaning points that need real vacuum at small flow.
The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Middle East
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Single-phase
- 220–240 V
- Incoterms
- CIF Jebel Ali (or FOB Nhava Sheva)
- Ports
- Jebel Ali · Dammam · Jeddah · Hamad · Sohar
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.
Sewage & STP aeration
Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.
Desalination & water treatment support
Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.
Aquaculture
Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.
Construction & cement
Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.
FAQRotary Vane Vacuum Pump for Textile — FAQs
How do you ship a Rotary Vane Vacuum Pump to Middle East?
Orders move CIF Jebel Ali (or FOB Nhava Sheva), routed through Jebel Ali. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
Which Rotary Vane Vacuum Pump model do I need for textile spinning and weaving in Middle East?
For a typical textile spinning and weaving duty of 1,200–6,000 m³/hr at moderate, high-flow, start with YELV-500 and step through YELV-500, YELV-650, YELV-1000 as the load rises. The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping. Send us your exact flow and vacuum and an engineer confirms the model and quotes it CIF Jebel Ali (or FOB Nhava Sheva).
RFQ / Request for Quotation
Rotary Vane Vacuum Pump for Textile in Middle East?
Send your duty point (1,200–6,000 m³/hr at moderate, high-flow), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).