SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)
Centrifugal Blower for Textile in Middle East
Centrifugal Blower sized for pneumafil suction, fibre transport and humidification air — 1,200–6,000 m³/hr at moderate, high-flow — and built for the Middle East grid, climate and shipping route.
A textile spinning and weaving line runs on air, and in Middle East the centrifugal blower that feeds it must be wound for 50 Hz, packed for the sea crossing, and backed by real spares. Textile runs on pneumafil suction, fibre transport and humidification air; size for 1,200–6,000 m³/hr and moderate, high-flow, add a design margin, and the centrifugal blower does the work without waste.
For a Middle East destination the two fixed points are the 50 Hz grid and the route to Jebel Ali — CIF Jebel Ali (or FOB Nhava Sheva). Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. The models to look at are YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-200-15; the sizing table and spec figures below get you into the right ballpark before you ask for a quotation.
MDLRecommended models
Centrifugal Blower — the fit for textile spinning and weaving
The core high-flow machine — pneumafil and travelling-cleaner suction, blow-room transport air and humidification supply at thousands of m³/hr.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
| YBCB-TBM-200-15 | 15 HP | 3900-5100 | 2295-3001 | 5000 | 6500 | 95/110 | 117 |
The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Middle East
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Single-phase
- 220–240 V
- Incoterms
- CIF Jebel Ali (or FOB Nhava Sheva)
- Ports
- Jebel Ali · Dammam · Jeddah · Hamad · Sohar
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.
Sewage & STP aeration
Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.
Desalination & water treatment support
Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.
Aquaculture
Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.
Construction & cement
Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.
FAQCentrifugal Blower for Textile — FAQs
Why a Centrifugal Blower for textile spinning and weaving rather than another machine?
Because textile spinning and weaving is pneumafil suction, fibre transport and humidification air, the centrifugal blower is the right machine class for the moderate, high-flow duty — it holds the point continuously without being an oversized compromise. Models YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-200-15 cover the usual range.
How do I get a firm price for a Centrifugal Blower into Middle East?
Send five things: the duty point (flow and airflow), the site voltage and phase, the quantity, the destination port and your preferred Incoterms. We confirm the 50 Hz model from YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-200-15, the CIF price, the lead time and the container loading — a quote in 24 hours.
RFQ / Request for Quotation
Centrifugal Blower for Textile in Middle East?
Send your duty point (1,200–6,000 m³/hr at moderate, high-flow), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).