SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
High Pressure Blower for Electroplating in Africa
High Pressure Blower sized for oil-free plating-bath air agitation and fume exhaust — 145–1,450 m³/hr at 100–300 mbar agitation — and built for the Africa grid, climate and shipping route.
A electroplating line runs on air, and in Africa the high-pressure centrifugal blower that feeds it must be wound for 50 Hz, packed for the sea crossing, and backed by real spares. In electroplating, the high-pressure centrifugal blower carries the oil-free plating-bath air agitation and fume exhaust load — 145–1,450 m³/hr at 100–300 mbar agitation is the band most sites land in.
For a Africa destination the two fixed points are the 50 Hz grid and the route to Mombasa — CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva). Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites. The shortlist below (YBCB-HP-919-2.2, YBCB-HP-919-4.0, YBCB-HP-919-5.5) is a starting point — real load figures turn it into a firm selection and a quote in 24 hours.
MDLRecommended models
High Pressure Blower — the fit for electroplating
For exhaust systems with long duct runs, tall scrubber packing or high static, where a general centrifugal runs out of head to hold capture velocity at the lip.
| Model | Power | Air flow | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|
| YBCB-HP-919-2.2 | 2.2KW / 3 HP | 824-1264 m3/hr | 3584-3297 PA | 91 | 62 |
| YBCB-HP-919-4.0 | 4KW/5 HP | 1174-2062 m3/hr | 4003-4447 PA | 95 | 87 |
| YBCB-HP-919-5.5 | 5.5KW / 7.5 HP | 2500-3750 m3/hr | 3852-3407 PA | 95 | 108 |
A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Africa
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
- Ports
- Mombasa · Dar es Salaam · Durban · Lagos · Tema
- HS code
- 8414 — air/gas blowers, fans & compressors
Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites.
Aquaculture
Diffused-air aeration for intensive tilapia, catfish and shrimp systems — holds dissolved oxygen in ponds, tanks and raceways across a fast-growing sector.
Mining & cement dust collection
Pressure and vacuum for pulse-jet baghouses and cartridge filters at crushers, transfer points, screens and bagging lines.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants as cities grow and effluent rules tighten — 24/7 rated machines.
Agriculture & food processing
Grain aeration, drying, and pneumatic conveying of flour, feed and granules in processing and packing lines.
FAQHigh Pressure Blower for Electroplating — FAQs
How do I get a firm price for a High Pressure Blower into Africa?
Send five things: the duty point (flow and pressure), the site voltage and phase, the quantity, the destination port and your preferred Incoterms. We confirm the 50 Hz model from YBCB-HP-919-2.2, YBCB-HP-919-4.0, YBCB-HP-919-5.5, the CIF price, the lead time and the container loading — a quote in 24 hours.
Why a High Pressure Blower for electroplating rather than another machine?
Because electroplating is oil-free plating-bath air agitation and fume exhaust, the high-pressure centrifugal blower is the right machine class for the 100–300 mbar agitation duty — it holds the point continuously without being an oversized compromise. Models YBCB-HP-919-2.2, YBCB-HP-919-4.0, YBCB-HP-919-5.5 cover the usual range.
RFQ / Request for Quotation
High Pressure Blower for Electroplating in Africa?
Send your duty point (145–1,450 m³/hr at 100–300 mbar agitation), site voltage and destination port — an engineer sizes the model and quotes CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva).