SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
Centrifugal Blower for Textile in Europe
Centrifugal Blower sized for pneumafil suction, fibre transport and humidification air — 1,200–6,000 m³/hr at moderate, high-flow — and built for the Europe grid, climate and shipping route.
A centrifugal blower exported to Europe for textile spinning and weaving has to do two jobs at once: hold its duty point on local power, and survive the conditions on site. Expect 1,200–6,000 m³/hr at moderate, high-flow for textile spinning and weaving work; the centrifugal blower is matched to that duty so it neither throttles nor runs short of airflow.
Delivered to Europe: 50 Hz at 400 V (3-phase), FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp, crated seaworthy under HS heading 8414. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Models such as YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-200-15 cover this duty; send the exact flow and airflow and an engineer confirms the YBCB-CX-125A or the size next to it.
MDLRecommended models
Centrifugal Blower — the fit for textile spinning and weaving
The core high-flow machine — pneumafil and travelling-cleaner suction, blow-room transport air and humidification supply at thousands of m³/hr.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
| YBCB-TBM-200-15 | 15 HP | 3900-5100 | 2295-3001 | 5000 | 6500 | 95/110 | 117 |
The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQCentrifugal Blower for Textile — FAQs
What about spares and lead time for a Europe order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Europe that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
Will the Centrifugal Blower run on Europe power?
Yes. Units for Europe are wound for 50 Hz at 400 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
RFQ / Request for Quotation
Centrifugal Blower for Textile in Europe?
Send your duty point (1,200–6,000 m³/hr at moderate, high-flow), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.