SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
Centrifugal Blower for Water Treatment Plants in Europe
Centrifugal Blower sized for iron & manganese aeration and rapid-filter air scour — 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour — and built for the Europe grid, climate and shipping route.
Yash exports the centrifugal blower into Europe for water treatment the same way it builds for India — cast, machined and dynamically balanced in-house under an ISO 9001:2015 system — with the 50 Hz and Incoterm details handled for the destination. The water treatment job is iron & manganese aeration and rapid-filter air scour. Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties.
For a Europe destination the two fixed points are the 50 Hz grid and the route to Rotterdam — FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Start with YBCB-CX-125A and move up or down the range as the duty demands; the full recommended set is YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-150-10.
MDLRecommended models
Centrifugal Blower — the fit for water treatment
The air-scour machine — high flow at low pressure for the short backwash burst that fluidises a rapid sand or multimedia bed; also fits degasser duty.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
| YBCB-TBM-150-10 | 10 HP | 3600-4500 | 2119-2648 | 4000 | 5300 | 90/95 | 82 |
Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQCentrifugal Blower for Water Treatment Plants — FAQs
How is a Centrifugal Blower sized for water treatment?
Sizing turns on two numbers — flow and airflow. Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. On this duty most selections sit around 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour. Fix the duty point, add a design margin, and pick the smallest model that covers both; YBCB-CX-125A and YBCB-CX-150A are the usual starting points.
Is the Centrifugal Blower rated for continuous water treatment duty?
Yes — the recommended YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-150-10 are dynamically balanced and built for the 24/7 load that water treatment runs. The duty here is iron & manganese aeration and rapid-filter air scour at 200–3,300 m³/hr / 100–350 mbar aeration / low-pressure air scour; the machine is selected to hold that point continuously, not just touch it on a test bench.
RFQ / Request for Quotation
Centrifugal Blower for Water Treatment Plants in Europe?
Send your duty point (200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.