SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
Centrifugal Blower for Plastics & PET Extrusion in Africa
Centrifugal Blower sized for hopper loading, PET drying air and vacuum sizing — 300–2,000 m³/hr at vacuum and pressure — and built for the Africa grid, climate and shipping route.
A centrifugal blower exported to Africa for plastics and PET extrusion has to do two jobs at once: hold its duty point on local power, and survive the conditions on site. The engineering point for plastics and PET extrusion is straightforward: Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. That puts most selections around 300–2,000 m³/hr at vacuum and pressure.
Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites. The supply is 50 Hz at 380–415 V (3-phase), and shipment is CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva). These centrifugal blowers — YBCB-CX-100A, YBCB-CX-125A, YBCB-CX-150A — are export-packed, ISO 9001:2015 built, and dispatched with spares support that keeps a Africa site running.
MDLRecommended models
Centrifugal Blower — the fit for plastics and PET extrusion
Compact cooling and drying-air supply on profile, sheet and pipe lines — steady volume at modest back-pressure.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-100A | 2.0 HP | 1200-1450 | 706-853 | 2000 | 3000 | 74/90 | 28 |
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Africa
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
- Ports
- Mombasa · Dar es Salaam · Durban · Lagos · Tema
- HS code
- 8414 — air/gas blowers, fans & compressors
Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites.
Aquaculture
Diffused-air aeration for intensive tilapia, catfish and shrimp systems — holds dissolved oxygen in ponds, tanks and raceways across a fast-growing sector.
Mining & cement dust collection
Pressure and vacuum for pulse-jet baghouses and cartridge filters at crushers, transfer points, screens and bagging lines.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants as cities grow and effluent rules tighten — 24/7 rated machines.
Agriculture & food processing
Grain aeration, drying, and pneumatic conveying of flour, feed and granules in processing and packing lines.
FAQCentrifugal Blower for Plastics & PET Extrusion — FAQs
How is a Centrifugal Blower sized for plastics and PET extrusion?
Sizing turns on two numbers — flow and airflow. Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. On this duty most selections sit around 300–2,000 m³/hr at vacuum and pressure. Fix the duty point, add a design margin, and pick the smallest model that covers both; YBCB-CX-100A and YBCB-CX-125A are the usual starting points.
Is the Centrifugal Blower rated for continuous plastics and PET extrusion duty?
Yes — the recommended YBCB-CX-100A, YBCB-CX-125A, YBCB-CX-150A are dynamically balanced and built for the 24/7 load that plastics and PET extrusion runs. The duty here is hopper loading, PET drying air and vacuum sizing at 300–2,000 m³/hr / vacuum and pressure; the machine is selected to hold that point continuously, not just touch it on a test bench.
RFQ / Request for Quotation
Centrifugal Blower for Plastics & PET Extrusion in Africa?
Send your duty point (300–2,000 m³/hr at vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva).