SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
Centrifugal Blower for Water Treatment Plants in Africa
Centrifugal Blower sized for iron & manganese aeration and rapid-filter air scour — 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour — and built for the Africa grid, climate and shipping route.
When a water treatment contractor in Africa asks Yash for a centrifugal blower, the quotation starts from the duty point and the 50 Hz supply — never from a catalogue number picked by guesswork. The engineering point for water treatment is straightforward: Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. That puts most selections around 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour.
For Africa, Yash winds the motor for 50 Hz at 380–415 V (3-phase). Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites. Any of YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-150-10 will suit a typical water treatment duty — tell us the numbers and we pin the exact model, price it CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva), and confirm lead time.
MDLRecommended models
Centrifugal Blower — the fit for water treatment
The air-scour machine — high flow at low pressure for the short backwash burst that fluidises a rapid sand or multimedia bed; also fits degasser duty.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
| YBCB-TBM-150-10 | 10 HP | 3600-4500 | 2119-2648 | 4000 | 5300 | 90/95 | 82 |
Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Africa
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
- Ports
- Mombasa · Dar es Salaam · Durban · Lagos · Tema
- HS code
- 8414 — air/gas blowers, fans & compressors
Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites.
Aquaculture
Diffused-air aeration for intensive tilapia, catfish and shrimp systems — holds dissolved oxygen in ponds, tanks and raceways across a fast-growing sector.
Mining & cement dust collection
Pressure and vacuum for pulse-jet baghouses and cartridge filters at crushers, transfer points, screens and bagging lines.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants as cities grow and effluent rules tighten — 24/7 rated machines.
Agriculture & food processing
Grain aeration, drying, and pneumatic conveying of flour, feed and granules in processing and packing lines.
FAQCentrifugal Blower for Water Treatment Plants — FAQs
How is a Centrifugal Blower sized for water treatment?
Sizing turns on two numbers — flow and airflow. Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. On this duty most selections sit around 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour. Fix the duty point, add a design margin, and pick the smallest model that covers both; YBCB-CX-125A and YBCB-CX-150A are the usual starting points.
Is the Centrifugal Blower rated for continuous water treatment duty?
Yes — the recommended YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-150-10 are dynamically balanced and built for the 24/7 load that water treatment runs. The duty here is iron & manganese aeration and rapid-filter air scour at 200–3,300 m³/hr / 100–350 mbar aeration / low-pressure air scour; the machine is selected to hold that point continuously, not just touch it on a test bench.
RFQ / Request for Quotation
Centrifugal Blower for Water Treatment Plants in Africa?
Send your duty point (200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour), site voltage and destination port — an engineer sizes the model and quotes CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva).