SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
Centrifugal Blower for Electroplating in United States
Centrifugal Blower sized for oil-free plating-bath air agitation and fume exhaust — 145–1,450 m³/hr at 100–300 mbar agitation — and built for the United States grid, climate and shipping route.
Yash exports the centrifugal blower into United States for electroplating the same way it builds for India — cast, machined and dynamically balanced in-house under an ISO 9001:2015 system — with the 60 Hz and Incoterm details handled for the destination. On this application the machine handles oil-free plating-bath air agitation and fume exhaust; A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss.
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Grid is 60 Hz, 208 / 230 / 460 V (3-phase), and the shipment clears FOB Nhava Sheva or CIF US ports. These centrifugal blowers — YBCB-CX-100A, YBCB-CX-125A, YBCB-CX-150A — are export-packed, ISO 9001:2015 built, and dispatched with spares support that keeps a United States site running.
MDLRecommended models
Centrifugal Blower — the fit for electroplating
General fume-exhaust and scrubber-draft duty — moves the tank-lip extraction volume against hood, duct and scrubber pressure drop.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-100A | 2.0 HP | 1200-1450 | 706-853 | 2000 | 3000 | 74/90 | 28 |
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQCentrifugal Blower for Electroplating — FAQs
Will the Centrifugal Blower run on United States power?
Yes. Units for United States are wound for 60 Hz at 208 / 230 / 460 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
What about spares and lead time for a United States order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For United States that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
RFQ / Request for Quotation
Centrifugal Blower for Electroplating in United States?
Send your duty point (145–1,450 m³/hr at 100–300 mbar agitation), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.