SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
Side Channel Blower for Electroplating in United States
Side Channel Blower sized for oil-free plating-bath air agitation and fume exhaust — 145–1,450 m³/hr at 100–300 mbar agitation — and built for the United States grid, climate and shipping route.
The right side channel blower for a electroplating duty in United States is the one whose pressure and flow match the process; everything else — voltage, crating, documentation — follows from the destination. The electroplating duty here is oil-free plating-bath air agitation and fume exhaust, typically 145–1,450 m³/hr at 100–300 mbar agitation, and the side channel blower is sized to sit inside that window with margin.
For a United States destination the two fixed points are the 60 Hz grid and the route to your US port — FOB Nhava Sheva or CIF US ports. Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. These side channel blowers — YEBL-1-145, YEBL-1-210, YEBL-1-320V — are export-packed, ISO 9001:2015 built, and dispatched with spares support that keeps a United States site running.
MDLRecommended models
Side Channel Blower — the fit for electroplating
Feeds the sparger with clean 100–200 mbar air for plating-bath agitation and runs 24/7 with no oil in the air path.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (mbar) | Pressure (mbar) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YEBL-1-145 | 1.0 HP | 145 | 85 | -150 | 160 | 63 | 14 |
| YEBL-1-210 | 2.0 HP | 210 | 123 | -190 | 200 | 70 | 23 |
| YEBL-1-320V | 4.0 HP | 320 | 188 | -270 | 290 | 69 | 37 |
A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQSide Channel Blower for Electroplating — FAQs
What about spares and lead time for a United States order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For United States that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
Will the Side Channel Blower run on United States power?
Yes. Units for United States are wound for 60 Hz at 208 / 230 / 460 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
RFQ / Request for Quotation
Side Channel Blower for Electroplating in United States?
Send your duty point (145–1,450 m³/hr at 100–300 mbar agitation), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.