SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
Side Channel Blower for Vacuum Conveying in Europe
Side Channel Blower sized for dilute-phase pneumatic vacuum conveying — 200–1,050 m³/hr at 150–500 mbar vacuum — and built for the Europe grid, climate and shipping route.
Yash exports the side channel blower into Europe for vacuum conveying the same way it builds for India — cast, machined and dynamically balanced in-house under an ISO 9001:2015 system — with the 50 Hz and Incoterm details handled for the destination. In vacuum conveying, the side channel blower carries the dilute-phase pneumatic vacuum conveying load — 200–1,050 m³/hr at 150–500 mbar vacuum is the band most sites land in.
Because Europe is a 50 Hz market, no frequency conversion is needed — the motor is wound for 400 V (3-phase) directly, and built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. The models to look at are YEBL-1-320V, YEBL-1-530, YEBL-1-700; the sizing table and spec figures below get you into the right ballpark before you ask for a quotation.
MDLRecommended models
Side Channel Blower — the fit for vacuum conveying
The default vacuum source for short-to-medium dilute-phase conveying in the 150–350 mbar range — one impeller, one filter to service.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (mbar) | Pressure (mbar) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YEBL-1-320V | 4.0 HP | 320 | 188 | -270 | 290 | 69 | 37 |
| YEBL-1-530 | 7.5 HP | 530 | 312 | -300 | 320 | 80 | 62 |
| YEBL-1-700 | 7.5 HP | 700 | 412 | -200 | 180 | 81 | 66 |
Line length and vertical lift set the vacuum; conveying rate sets the airflow. Deeper vacuum keeps material entrained to the receiver. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQSide Channel Blower for Vacuum Conveying — FAQs
What about spares and lead time for a Europe order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Europe that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
Will the Side Channel Blower run on Europe power?
Yes. Units for Europe are wound for 50 Hz at 400 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
RFQ / Request for Quotation
Side Channel Blower for Vacuum Conveying in Europe?
Send your duty point (200–1,050 m³/hr at 150–500 mbar vacuum), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.