SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
Rotary Vane Vacuum Pump for Water Treatment Plants in Europe
Rotary Vane Vacuum Pump sized for iron & manganese aeration and rapid-filter air scour — 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour — and built for the Europe grid, climate and shipping route.
The right rotary vane / liquid-ring vacuum pump for a water treatment duty in Europe is the one whose vacuum and flow match the process; everything else — voltage, crating, documentation — follows from the destination. The process asks for iron & manganese aeration and rapid-filter air scour, so the rotary vane / liquid-ring vacuum pump is chosen for a 100–350 mbar aeration / low-pressure air scour duty at 200–3,300 m³/hr rather than a headline figure.
Into Europe, orders route FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp to Rotterdam, on 50 Hz / 400 V (3-phase) builds. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Yash has built for this since 1998 with impellers, filters and PRVs made under one roof, so the recommended YELVD-300, YELV-500, YELV-650 come with a real spares chain, not a promise.
MDLRecommended models
Rotary Vane Vacuum Pump — the fit for water treatment
Liquid-ring vacuum for degasification and priming duty — the ring seal handles the wet, saturated gas these services pull.
Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQRotary Vane Vacuum Pump for Water Treatment Plants — FAQs
Is the Rotary Vane Vacuum Pump rated for continuous water treatment duty?
Yes — the recommended YELVD-300, YELV-500, YELV-650 are dynamically balanced and built for the 24/7 load that water treatment runs. The duty here is iron & manganese aeration and rapid-filter air scour at 200–3,300 m³/hr / 100–350 mbar aeration / low-pressure air scour; the machine is selected to hold that point continuously, not just touch it on a test bench.
How is a Rotary Vane Vacuum Pump sized for water treatment?
Sizing turns on two numbers — flow and vacuum. Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. On this duty most selections sit around 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour. Fix the duty point, add a design margin, and pick the smallest model that covers both; YELVD-300 and YELV-500 are the usual starting points.
RFQ / Request for Quotation
Rotary Vane Vacuum Pump for Water Treatment Plants in Europe?
Send your duty point (200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.