SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
Rotary Vane Vacuum Pump for Printing & Packaging in Europe
Rotary Vane Vacuum Pump sized for sheet-feeder vacuum hold-down and blow air — 80–300 m³/hr at 80–290 mbar vacuum and pressure — and built for the Europe grid, climate and shipping route.
When a printing and packaging contractor in Europe asks Yash for a rotary vane / liquid-ring vacuum pump, the quotation starts from the duty point and the 50 Hz supply — never from a catalogue number picked by guesswork. On this application the machine handles sheet-feeder vacuum hold-down and blow air; One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail.
Because Europe is a 50 Hz market, no frequency conversion is needed — the motor is wound for 400 V (3-phase) directly, and built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Below are the rotary vane vacuum pumps that fit — YELVD-300, YELV-300, YELV-500 — with the specs, vacuum and flow figures you need to choose. Send your duty point to confirm.
MDLRecommended models
Rotary Vane Vacuum Pump — the fit for printing and packaging
Dedicated vacuum for suction-only duty — vacuum hold-down beds, screen exposure frames and delivery stacking where you do not need the blow side.
One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQRotary Vane Vacuum Pump for Printing & Packaging — FAQs
Will the Rotary Vane Vacuum Pump run on Europe power?
Yes. Units for Europe are wound for 50 Hz at 400 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
What about spares and lead time for a Europe order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Europe that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
RFQ / Request for Quotation
Rotary Vane Vacuum Pump for Printing & Packaging in Europe?
Send your duty point (80–300 m³/hr at 80–290 mbar vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.