SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
Oil-Free Vacuum Pump for Printing & Packaging in Europe
Oil-Free Vacuum Pump sized for sheet-feeder vacuum hold-down and blow air — 80–300 m³/hr at 80–290 mbar vacuum and pressure — and built for the Europe grid, climate and shipping route.
The right oil-free dry vacuum pump for a printing and packaging duty in Europe is the one whose vacuum and flow match the process; everything else — voltage, crating, documentation — follows from the destination. Get the printing and packaging sizing right and the rest is easy: the duty is sheet-feeder vacuum hold-down and blow air, the window is 80–300 m³/hr / 80–290 mbar vacuum and pressure, and One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail.
In Europe, expect 50 Hz at 400 V (3-phase) and delivery FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Yash has built for this since 1998 with impellers, filters and PRVs made under one roof, so the recommended YBDVP 10, YBDVP 25, YBDVP 40 come with a real spares chain, not a promise.
MDLRecommended models
Oil-Free Vacuum Pump — the fit for printing and packaging
Compact oil-free vacuum for clean hold-down and pick-and-place where an oil mist would mark the stock — no oil anywhere near the sheet.
One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQOil-Free Vacuum Pump for Printing & Packaging — FAQs
How do you ship a Oil-Free Vacuum Pump to Europe?
Orders move FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp, routed through Rotterdam. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
Which Oil-Free Vacuum Pump model do I need for printing and packaging in Europe?
For a typical printing and packaging duty of 80–300 m³/hr at 80–290 mbar vacuum and pressure, start with YBDVP 10 and step through YBDVP 10, YBDVP 25, YBDVP 40 as the load rises. One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. Send us your exact flow and vacuum and an engineer confirms the model and quotes it FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.
RFQ / Request for Quotation
Oil-Free Vacuum Pump for Printing & Packaging in Europe?
Send your duty point (80–300 m³/hr at 80–290 mbar vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.