SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
Oil-Free Vacuum Pump for Vacuum Conveying in Africa
Oil-Free Vacuum Pump sized for dilute-phase pneumatic vacuum conveying — 200–1,050 m³/hr at 150–500 mbar vacuum — and built for the Africa grid, climate and shipping route.
Yash exports the oil-free dry vacuum pump into Africa for vacuum conveying the same way it builds for India — cast, machined and dynamically balanced in-house under an ISO 9001:2015 system — with the 50 Hz and Incoterm details handled for the destination. Because vacuum conveying is dilute-phase pneumatic vacuum conveying, the machine must hold its duty continuously — 200–1,050 m³/hr at 150–500 mbar vacuum — not just touch it on a test bench.
Into Africa, orders route CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva) to Mombasa, on 50 Hz / 380–415 V (3-phase) builds. Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites. The recommended models are YBDVP 100, YBDVP 160, YBDVP 360; each is dynamically balanced for the continuous duty vacuum conveying runs, and each ships with test certificates on request.
MDLRecommended models
Oil-Free Vacuum Pump — the fit for vacuum conveying
Oil-free deep vacuum for food, pharma and fine-chemical transfer and continuous heavy duty — nothing to contaminate the product, no oil changes.
Line length and vertical lift set the vacuum; conveying rate sets the airflow. Deeper vacuum keeps material entrained to the receiver. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Africa
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
- Ports
- Mombasa · Dar es Salaam · Durban · Lagos · Tema
- HS code
- 8414 — air/gas blowers, fans & compressors
Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites.
Aquaculture
Diffused-air aeration for intensive tilapia, catfish and shrimp systems — holds dissolved oxygen in ponds, tanks and raceways across a fast-growing sector.
Mining & cement dust collection
Pressure and vacuum for pulse-jet baghouses and cartridge filters at crushers, transfer points, screens and bagging lines.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants as cities grow and effluent rules tighten — 24/7 rated machines.
Agriculture & food processing
Grain aeration, drying, and pneumatic conveying of flour, feed and granules in processing and packing lines.
FAQOil-Free Vacuum Pump for Vacuum Conveying — FAQs
Is the Oil-Free Vacuum Pump rated for continuous vacuum conveying duty?
Yes — the recommended YBDVP 100, YBDVP 160, YBDVP 360 are dynamically balanced and built for the 24/7 load that vacuum conveying runs. The duty here is dilute-phase pneumatic vacuum conveying at 200–1,050 m³/hr / 150–500 mbar vacuum; the machine is selected to hold that point continuously, not just touch it on a test bench.
How is a Oil-Free Vacuum Pump sized for vacuum conveying?
Sizing turns on two numbers — flow and vacuum. Line length and vertical lift set the vacuum; conveying rate sets the airflow. Deeper vacuum keeps material entrained to the receiver. On this duty most selections sit around 200–1,050 m³/hr at 150–500 mbar vacuum. Fix the duty point, add a design margin, and pick the smallest model that covers both; YBDVP 100 and YBDVP 160 are the usual starting points.
RFQ / Request for Quotation
Oil-Free Vacuum Pump for Vacuum Conveying in Africa?
Send your duty point (200–1,050 m³/hr at 150–500 mbar vacuum), site voltage and destination port — an engineer sizes the model and quotes CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva).