SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
High Pressure Blower for Dust Collection in Europe
High Pressure Blower sized for baghouse / cartridge collector draft and pulse-jet cleaning — 1,200–6,000 m³/hr at 2,000–9,000 Pa static — and built for the Europe grid, climate and shipping route.
Sizing a high-pressure centrifugal blower for dust collection is an exercise in pressure and flow — and for a Europe project the build is then adjusted to the grid, ambient and shipping route. In dust collection, the high-pressure centrifugal blower carries the baghouse / cartridge collector draft and pulse-jet cleaning load — 1,200–6,000 m³/hr at 2,000–9,000 Pa static is the band most sites land in.
Power in Europe is 50 Hz / 400 V (3-phase); confirm the exact site voltage and the high-pressure centrifugal blower hits its rated duty on your supply. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. For most dust collection projects in Europe the answer is one of YBCB-HP-919-5.5, YBCB-HP-919-7.5, YBCB-HP-919-11 — confirm the duty and we quote the YBCB-HP-919-5.5 or its neighbour firm.
MDLRecommended models
High Pressure Blower — the fit for dust collection
Higher static headroom for long duct runs, deep filters and pulse-jet cleaning supply where a standard centrifugal fan runs out of pressure.
| Model | Power | Air flow | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|
| YBCB-HP-919-5.5 | 5.5KW / 7.5 HP | 2500-3750 m3/hr | 3852-3407 PA | 95 | 108 |
| YBCB-HP-919-7.5 | 7.5KW/10 HP | 3130-3680 m3/hr | 4910-4776 PA | 98 | 133 |
| YBCB-HP-919-11 | 11KW/15 HP | 2622-3619 m3/hr | 7182-7019 PA | 99 | 169 |
Static pressure climbs as the filter cake builds; pick a machine whose curve holds airflow across the full dirty-to-clean range. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQHigh Pressure Blower for Dust Collection — FAQs
What about spares and lead time for a Europe order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Europe that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
Will the High Pressure Blower run on Europe power?
Yes. Units for Europe are wound for 50 Hz at 400 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
RFQ / Request for Quotation
High Pressure Blower for Dust Collection in Europe?
Send your duty point (1,200–6,000 m³/hr at 2,000–9,000 Pa static), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.