SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
Centrifugal Blower for Electroplating in Africa
Centrifugal Blower sized for oil-free plating-bath air agitation and fume exhaust — 145–1,450 m³/hr at 100–300 mbar agitation — and built for the Africa grid, climate and shipping route.
Buyers across Nigeria, Kenya, Ghana, Tanzania and South Africa sourcing a centrifugal blower for electroplating want the same envelope the premium brands occupy — at a landed cost Indian manufacturing can hold. Because electroplating is oil-free plating-bath air agitation and fume exhaust, the machine must hold its duty continuously — 145–1,450 m³/hr at 100–300 mbar agitation — not just touch it on a test bench.
The Africa grid is 50 Hz, 380–415 V (3-phase) three-phase — the machine is wound to match, and genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites. The shortlist below (YBCB-CX-100A, YBCB-CX-125A, YBCB-CX-150A) is a starting point — real load figures turn it into a firm selection and a quote in 24 hours.
MDLRecommended models
Centrifugal Blower — the fit for electroplating
General fume-exhaust and scrubber-draft duty — moves the tank-lip extraction volume against hood, duct and scrubber pressure drop.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-100A | 2.0 HP | 1200-1450 | 706-853 | 2000 | 3000 | 74/90 | 28 |
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Africa
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
- Ports
- Mombasa · Dar es Salaam · Durban · Lagos · Tema
- HS code
- 8414 — air/gas blowers, fans & compressors
Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites.
Aquaculture
Diffused-air aeration for intensive tilapia, catfish and shrimp systems — holds dissolved oxygen in ponds, tanks and raceways across a fast-growing sector.
Mining & cement dust collection
Pressure and vacuum for pulse-jet baghouses and cartridge filters at crushers, transfer points, screens and bagging lines.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants as cities grow and effluent rules tighten — 24/7 rated machines.
Agriculture & food processing
Grain aeration, drying, and pneumatic conveying of flour, feed and granules in processing and packing lines.
FAQCentrifugal Blower for Electroplating — FAQs
What about spares and lead time for a Africa order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Africa that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
Will the Centrifugal Blower run on Africa power?
Yes. Units for Africa are wound for 50 Hz at 380–415 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
RFQ / Request for Quotation
Centrifugal Blower for Electroplating in Africa?
Send your duty point (145–1,450 m³/hr at 100–300 mbar agitation), site voltage and destination port — an engineer sizes the model and quotes CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva).