Sourcing · Airtech alternative
A Yash Blowers Alternative to Airtech
If you build machinery around Airtech regenerative blowers and want a second source at the same duty, here is how the Yash side channel range compares.
01Why buyers source an alternative
Airtech is known for Regenerative (side channel) blowers and vacuum blowers for OEM machinery.
Airtech regenerative blowers are widely used on OEM skids, so a machine builder sourcing an alternative usually wants the same duty at a landed cost that protects margin, with a delivery date that fits a production run.
Volume buyers value a stocked spares chain and a qualified second source above all — it keeps a build schedule intact even when one supplier slips.
None of this is a knock on the original equipment — it is simply why a buyer keeps a qualified second source on the approved-vendor list. The honest answer is always the same: match the machine to the duty point, not the badge.
02How Yash compares
Yash builds oil-free side channel (regenerative) blowers across the OEM duty band Airtech serves, with in-house impeller casting and balancing so the supply and spares chain sits under one roof.
- Certified
- ISO 9001:2015 quality system
- Established
- Manufacturing since 1998
- Range
- 123 models across 14 families
- Oil-free
- Dedicated oil-free blower & vacuum options
- In-house
- Impellers cast, machined & balanced under one roof
- Cost base
- India-built, priced in INR for export
- Dispatch
- 300+ units dispatched per day
03Matching Yash families
Duty ranges below are Yash Blowers' own published figures. No Airtech specification is reproduced — matching is always confirmed against your actual duty point.
Single Stage Turbine Blower
View the range →- Flow:
- 80–1370 m³/hr
- Pressure:
- up to 460 mbar
- Vacuum:
- to -340 mbar
- Power:
- 0.25 HP – 24.5 HP
Double Stage Turbine Blower
View the range →- Flow:
- 88–2050 m³/hr
- Pressure:
- up to 660 mbar
- Vacuum:
- to -440 mbar
- Power:
- 1.0 HP – 33.0 HP
High Pressure Series
View the range →- Flow:
- 47–170 m³/hr
- Pressure:
- up to 1040 mbar
- Vacuum:
- to -730 mbar
- Power:
- 2.0 HP – 10 HP
04Matching by duty point
Match on flow and the pressure or vacuum the duty demands; the regenerative curve is comparable, so the working numbers transfer. Single-stage suits lighter conveying and aeration; double-stage and the high-pressure series cover heavier duty. Send the Airtech duty point and we confirm flange, port and dimensions before switching.
Disclaimer
Airtech is a trademark of its respective owner. Yash Blowers is not affiliated with or endorsed by Airtech. Comparisons are general guidance — confirm duty point, flange and dimensions with our engineers before switching.
05Airtech alternative — FAQs
- Can Yash support OEM volumes as a second source for Airtech blowers?
- Yes. Yash casts and balances impellers in-house and dispatches at volume daily, so a machine builder can qualify Yash as a second source at a defined duty point. Share your annual duty and quantities to start.
- Is Yash Blowers affiliated with Airtech?
- No. Airtech is a trademark of its respective owner. Yash Blowers is an independent manufacturer, not affiliated with or endorsed by Airtech, offering a factual duty-point comparison only.
RFQ / Request for Quotation
Sourcing an alternative to Airtech?
Send the duty point of your current machine — flow and pressure or vacuum, the application and inlet size — and an engineer cross-references a Yash blower and quotes in 24 hours.