SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
Side Channel Blower for Water Treatment Plants in United States
Side Channel Blower sized for iron & manganese aeration and rapid-filter air scour — 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour — and built for the United States grid, climate and shipping route.
Sizing a side channel blower for water treatment is an exercise in pressure and flow — and for a United States project the build is then adjusted to the grid, ambient and shipping route. Water Treatment Plants runs on iron & manganese aeration and rapid-filter air scour; size for 200–3,300 m³/hr and 100–350 mbar aeration / low-pressure air scour, add a design margin, and the side channel blower does the work without waste.
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Grid is 60 Hz, 208 / 230 / 460 V (3-phase), and the shipment clears FOB Nhava Sheva or CIF US ports. The shortlist below (YEBL-1-210, YEBL-1-345, YEBL-1-530) is a starting point — real load figures turn it into a firm selection and a quote in 24 hours.
MDLRecommended models
Side Channel Blower — the fit for water treatment
Steady oil-free air for iron and manganese removal in diffused aeration or contact tanks under ~2 m of water.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (mbar) | Pressure (mbar) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YEBL-1-210 | 2.0 HP | 210 | 123 | -190 | 200 | 70 | 23 |
| YEBL-1-345 | 2.0 HP | 345 | 203 | -125 | 125 | 70 | 26 |
| YEBL-1-530 | 7.5 HP | 530 | 312 | -300 | 320 | 80 | 62 |
Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQSide Channel Blower for Water Treatment Plants — FAQs
How is a Side Channel Blower sized for water treatment?
Sizing turns on two numbers — flow and pressure. Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. On this duty most selections sit around 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour. Fix the duty point, add a design margin, and pick the smallest model that covers both; YEBL-1-210 and YEBL-1-345 are the usual starting points.
Is the Side Channel Blower rated for continuous water treatment duty?
Yes — the recommended YEBL-1-210, YEBL-1-345, YEBL-1-530 are dynamically balanced and built for the 24/7 load that water treatment runs. The duty here is iron & manganese aeration and rapid-filter air scour at 200–3,300 m³/hr / 100–350 mbar aeration / low-pressure air scour; the machine is selected to hold that point continuously, not just touch it on a test bench.
RFQ / Request for Quotation
Side Channel Blower for Water Treatment Plants in United States?
Send your duty point (200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.