SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
Side Channel Blower for Effluent Treatment Plants in United States
Side Channel Blower sized for activated-sludge and SBR aeration on variable industrial load — 150–1,100 m³/hr at 250–650 mbar — and built for the United States grid, climate and shipping route.
For effluent treatment work in United States, a side channel blower earns its place by holding 250–650 mbar reliably — and by being the right machine class for the job rather than an oversized compromise. Effluent Treatment Plants runs on activated-sludge and SBR aeration on variable industrial load; size for 150–1,100 m³/hr and 250–650 mbar, add a design margin, and the side channel blower does the work without waste.
The United States build is specified for 60 Hz / 208 / 230 / 460 V (3-phase) and ships FOB Nhava Sheva or CIF US ports via your US port. Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. The recommended models are YEBL-1-270, YEBL-1-400, YEBL-1-530; each is dynamically balanced for the continuous duty effluent treatment runs, and each ships with test certificates on request.
MDLRecommended models
Side Channel Blower — the fit for effluent treatment
Equalization-tank mixing and shallow aeration up to ~2 m deep — clean air for continuous or SBR duty on small-to-mid ETPs.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (mbar) | Pressure (mbar) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YEBL-1-270 | 3.0 HP | 270 | 158 | -230 | 250 | 67 | 27 |
| YEBL-1-400 | 5.0 HP | 400 | 235 | -290 | 330 | 77 | 40 |
| YEBL-1-530 | 7.5 HP | 530 | 312 | -300 | 320 | 80 | 62 |
Match discharge pressure to tank depth and diffuser resistance; a PRV caps back-pressure through settle and decant phases. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQSide Channel Blower for Effluent Treatment Plants — FAQs
How do I get a firm price for a Side Channel Blower into United States?
Send five things: the duty point (flow and pressure), the site voltage and phase, the quantity, the destination port and your preferred Incoterms. We confirm the 60 Hz model from YEBL-1-270, YEBL-1-400, YEBL-1-530, the CIF price, the lead time and the container loading — a quote in 24 hours.
Why a Side Channel Blower for effluent treatment rather than another machine?
Because effluent treatment is activated-sludge and SBR aeration on variable industrial load, the side channel blower is the right machine class for the 250–650 mbar duty — it holds the point continuously without being an oversized compromise. Models YEBL-1-270, YEBL-1-400, YEBL-1-530 cover the usual range.
RFQ / Request for Quotation
Side Channel Blower for Effluent Treatment Plants in United States?
Send your duty point (150–1,100 m³/hr at 250–650 mbar), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.