SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
Side Channel Blower for Effluent Treatment Plants in Europe
Side Channel Blower sized for activated-sludge and SBR aeration on variable industrial load — 150–1,100 m³/hr at 250–650 mbar — and built for the Europe grid, climate and shipping route.
For a effluent treatment plant in Europe, the side channel blower is the component the process leans on — and Yash builds it to the 250–650 mbar band the job needs, not to a generic datasheet. Effluent Treatment Plants means activated-sludge and SBR aeration on variable industrial load — plan for 150–1,100 m³/hr and 250–650 mbar, and pick the smallest model that covers both.
Power in Europe is 50 Hz / 400 V (3-phase); confirm the exact site voltage and the side channel blower hits its rated duty on your supply. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. The models to look at are YEBL-1-270, YEBL-1-400, YEBL-1-530; the sizing table and spec figures below get you into the right ballpark before you ask for a quotation.
MDLRecommended models
Side Channel Blower — the fit for effluent treatment
Equalization-tank mixing and shallow aeration up to ~2 m deep — clean air for continuous or SBR duty on small-to-mid ETPs.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (mbar) | Pressure (mbar) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YEBL-1-270 | 3.0 HP | 270 | 158 | -230 | 250 | 67 | 27 |
| YEBL-1-400 | 5.0 HP | 400 | 235 | -290 | 330 | 77 | 40 |
| YEBL-1-530 | 7.5 HP | 530 | 312 | -300 | 320 | 80 | 62 |
Match discharge pressure to tank depth and diffuser resistance; a PRV caps back-pressure through settle and decant phases. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQSide Channel Blower for Effluent Treatment Plants — FAQs
Will the Side Channel Blower run on Europe power?
Yes. Units for Europe are wound for 50 Hz at 400 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
What about spares and lead time for a Europe order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Europe that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
RFQ / Request for Quotation
Side Channel Blower for Effluent Treatment Plants in Europe?
Send your duty point (150–1,100 m³/hr at 250–650 mbar), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.