SOLSolution
50 Hz · 380–415 V (3-phase) · CIF your SE Asian port (or FOB Nhava Sheva)
Rotary Vane Vacuum Pump for Printing & Packaging in Asia
Rotary Vane Vacuum Pump sized for sheet-feeder vacuum hold-down and blow air — 80–300 m³/hr at 80–290 mbar vacuum and pressure — and built for the Asia grid, climate and shipping route.
For printing and packaging work in Asia, a rotary vane / liquid-ring vacuum pump earns its place by holding 80–290 mbar vacuum and pressure reliably — and by being the right machine class for the job rather than an oversized compromise. This is a sheet-feeder vacuum hold-down and blow air duty: One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail.
The Asia grid is 50 Hz, 380–415 V (3-phase) three-phase — the machine is wound to match, and short transit from India's west coast keeps lead time in days, priced for high-volume regional sourcing. The shortlist below (YELVD-300, YELV-300, YELV-500) is a starting point — real load figures turn it into a firm selection and a quote in 24 hours.
MDLRecommended models
Rotary Vane Vacuum Pump — the fit for printing and packaging
Dedicated vacuum for suction-only duty — vacuum hold-down beds, screen exposure frames and delivery stacking where you do not need the blow side.
One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Asia
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF your SE Asian port (or FOB Nhava Sheva)
- Ports
- Chittagong · Ho Chi Minh City · Jakarta · Bangkok · Port Klang · Colombo
- HS code
- 8414 — air/gas blowers, fans & compressors
Short transit from India's west coast keeps lead time in days, priced for high-volume regional sourcing.
Textiles
Air-jet weaving, yarn cleaning, humidification and dust extraction across the Bangladesh and Vietnam spinning and weaving base.
Plastics & PET
Material conveying, drying-hopper air, blow-moulding assist and vacuum handling at converters and bottle plants.
Aquaculture
Diffused-air aeration for Southeast Asian shrimp ponds and RAS fish systems — 24/7 dissolved-oxygen duty.
Printing & packaging
Vacuum for sheet-feeding, pick-and-place, laminating and pouch handling on regional machinery.
FAQRotary Vane Vacuum Pump for Printing & Packaging — FAQs
Is the Rotary Vane Vacuum Pump rated for continuous printing and packaging duty?
Yes — the recommended YELVD-300, YELV-300, YELV-500 are dynamically balanced and built for the 24/7 load that printing and packaging runs. The duty here is sheet-feeder vacuum hold-down and blow air at 80–300 m³/hr / 80–290 mbar vacuum and pressure; the machine is selected to hold that point continuously, not just touch it on a test bench.
How is a Rotary Vane Vacuum Pump sized for printing and packaging?
Sizing turns on two numbers — flow and vacuum. One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. On this duty most selections sit around 80–300 m³/hr at 80–290 mbar vacuum and pressure. Fix the duty point, add a design margin, and pick the smallest model that covers both; YELVD-300 and YELV-300 are the usual starting points.
RFQ / Request for Quotation
Rotary Vane Vacuum Pump for Printing & Packaging in Asia?
Send your duty point (80–300 m³/hr at 80–290 mbar vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes CIF your SE Asian port (or FOB Nhava Sheva).