SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)
Centrifugal Blower for Electroplating in Middle East
Centrifugal Blower sized for oil-free plating-bath air agitation and fume exhaust — 145–1,450 m³/hr at 100–300 mbar agitation — and built for the Middle East grid, climate and shipping route.
Buyers across the UAE, Saudi Arabia, Qatar, Oman and the Levant sourcing a centrifugal blower for electroplating want the same envelope the premium brands occupy — at a landed cost Indian manufacturing can hold. On this application the machine handles oil-free plating-bath air agitation and fume exhaust; A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss.
For Middle East, Yash winds the motor for 50 Hz at 380–415 V (3-phase). Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. These centrifugal blowers — YBCB-CX-100A, YBCB-CX-125A, YBCB-CX-150A — are export-packed, ISO 9001:2015 built, and dispatched with spares support that keeps a Middle East site running.
MDLRecommended models
Centrifugal Blower — the fit for electroplating
General fume-exhaust and scrubber-draft duty — moves the tank-lip extraction volume against hood, duct and scrubber pressure drop.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-100A | 2.0 HP | 1200-1450 | 706-853 | 2000 | 3000 | 74/90 | 28 |
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Middle East
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Single-phase
- 220–240 V
- Incoterms
- CIF Jebel Ali (or FOB Nhava Sheva)
- Ports
- Jebel Ali · Dammam · Jeddah · Hamad · Sohar
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.
Sewage & STP aeration
Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.
Desalination & water treatment support
Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.
Aquaculture
Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.
Construction & cement
Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.
FAQCentrifugal Blower for Electroplating — FAQs
Why a Centrifugal Blower for electroplating rather than another machine?
Because electroplating is oil-free plating-bath air agitation and fume exhaust, the centrifugal blower is the right machine class for the 100–300 mbar agitation duty — it holds the point continuously without being an oversized compromise. Models YBCB-CX-100A, YBCB-CX-125A, YBCB-CX-150A cover the usual range.
How do I get a firm price for a Centrifugal Blower into Middle East?
Send five things: the duty point (flow and airflow), the site voltage and phase, the quantity, the destination port and your preferred Incoterms. We confirm the 50 Hz model from YBCB-CX-100A, YBCB-CX-125A, YBCB-CX-150A, the CIF price, the lead time and the container loading — a quote in 24 hours.
RFQ / Request for Quotation
Centrifugal Blower for Electroplating in Middle East?
Send your duty point (145–1,450 m³/hr at 100–300 mbar agitation), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).