SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)
Side Channel Blower for Electroplating in Middle East
Side Channel Blower sized for oil-free plating-bath air agitation and fume exhaust — 145–1,450 m³/hr at 100–300 mbar agitation — and built for the Middle East grid, climate and shipping route.
Yash exports the side channel blower into Middle East for electroplating the same way it builds for India — cast, machined and dynamically balanced in-house under an ISO 9001:2015 system — with the 50 Hz and Incoterm details handled for the destination. The electroplating duty here is oil-free plating-bath air agitation and fume exhaust, typically 145–1,450 m³/hr at 100–300 mbar agitation, and the side channel blower is sized to sit inside that window with margin.
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. The supply is 50 Hz at 380–415 V (3-phase), and shipment is CIF Jebel Ali (or FOB Nhava Sheva). These side channel blowers — YEBL-1-145, YEBL-1-210, YEBL-1-320V — are export-packed, ISO 9001:2015 built, and dispatched with spares support that keeps a Middle East site running.
MDLRecommended models
Side Channel Blower — the fit for electroplating
Feeds the sparger with clean 100–200 mbar air for plating-bath agitation and runs 24/7 with no oil in the air path.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (mbar) | Pressure (mbar) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YEBL-1-145 | 1.0 HP | 145 | 85 | -150 | 160 | 63 | 14 |
| YEBL-1-210 | 2.0 HP | 210 | 123 | -190 | 200 | 70 | 23 |
| YEBL-1-320V | 4.0 HP | 320 | 188 | -270 | 290 | 69 | 37 |
A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Middle East
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Single-phase
- 220–240 V
- Incoterms
- CIF Jebel Ali (or FOB Nhava Sheva)
- Ports
- Jebel Ali · Dammam · Jeddah · Hamad · Sohar
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.
Sewage & STP aeration
Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.
Desalination & water treatment support
Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.
Aquaculture
Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.
Construction & cement
Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.
FAQSide Channel Blower for Electroplating — FAQs
How do you ship a Side Channel Blower to Middle East?
Orders move CIF Jebel Ali (or FOB Nhava Sheva), routed through Jebel Ali. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
Which Side Channel Blower model do I need for electroplating in Middle East?
For a typical electroplating duty of 145–1,450 m³/hr at 100–300 mbar agitation, start with YEBL-1-145 and step through YEBL-1-145, YEBL-1-210, YEBL-1-320V as the load rises. A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Send us your exact flow and pressure and an engineer confirms the model and quotes it CIF Jebel Ali (or FOB Nhava Sheva).
RFQ / Request for Quotation
Side Channel Blower for Electroplating in Middle East?
Send your duty point (145–1,450 m³/hr at 100–300 mbar agitation), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).