SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
Side Channel Blower for Electroplating in Europe
Side Channel Blower sized for oil-free plating-bath air agitation and fume exhaust — 145–1,450 m³/hr at 100–300 mbar agitation — and built for the Europe grid, climate and shipping route.
Sizing a side channel blower for electroplating is an exercise in pressure and flow — and for a Europe project the build is then adjusted to the grid, ambient and shipping route. Expect 145–1,450 m³/hr at 100–300 mbar agitation for electroplating work; the side channel blower is matched to that duty so it neither throttles nor runs short of pressure.
Power in Europe is 50 Hz / 400 V (3-phase); confirm the exact site voltage and the side channel blower hits its rated duty on your supply. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Start with YEBL-1-145 and move up or down the range as the duty demands; the full recommended set is YEBL-1-145, YEBL-1-210, YEBL-1-320V.
MDLRecommended models
Side Channel Blower — the fit for electroplating
Feeds the sparger with clean 100–200 mbar air for plating-bath agitation and runs 24/7 with no oil in the air path.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (mbar) | Pressure (mbar) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YEBL-1-145 | 1.0 HP | 145 | 85 | -150 | 160 | 63 | 14 |
| YEBL-1-210 | 2.0 HP | 210 | 123 | -190 | 200 | 70 | 23 |
| YEBL-1-320V | 4.0 HP | 320 | 188 | -270 | 290 | 69 | 37 |
A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQSide Channel Blower for Electroplating — FAQs
Which Side Channel Blower model do I need for electroplating in Europe?
For a typical electroplating duty of 145–1,450 m³/hr at 100–300 mbar agitation, start with YEBL-1-145 and step through YEBL-1-145, YEBL-1-210, YEBL-1-320V as the load rises. A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Send us your exact flow and pressure and an engineer confirms the model and quotes it FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.
How do you ship a Side Channel Blower to Europe?
Orders move FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp, routed through Rotterdam. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
RFQ / Request for Quotation
Side Channel Blower for Electroplating in Europe?
Send your duty point (145–1,450 m³/hr at 100–300 mbar agitation), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.