SOLSolution
50 Hz · 380–415 V (3-phase) · CIF your SE Asian port (or FOB Nhava Sheva)
Side Channel Blower for Effluent Treatment Plants in Asia
Side Channel Blower sized for activated-sludge and SBR aeration on variable industrial load — 150–1,100 m³/hr at 250–650 mbar — and built for the Asia grid, climate and shipping route.
Sizing a side channel blower for effluent treatment is an exercise in pressure and flow — and for a Asia project the build is then adjusted to the grid, ambient and shipping route. The effluent treatment job is activated-sludge and SBR aeration on variable industrial load. Match discharge pressure to tank depth and diffuser resistance; a PRV caps back-pressure through settle and decant phases.
The Asia grid is 50 Hz, 380–415 V (3-phase) three-phase — the machine is wound to match, and short transit from India's west coast keeps lead time in days, priced for high-volume regional sourcing. These side channel blowers — YEBL-1-270, YEBL-1-400, YEBL-1-530 — are export-packed, ISO 9001:2015 built, and dispatched with spares support that keeps a Asia site running.
MDLRecommended models
Side Channel Blower — the fit for effluent treatment
Equalization-tank mixing and shallow aeration up to ~2 m deep — clean air for continuous or SBR duty on small-to-mid ETPs.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (mbar) | Pressure (mbar) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YEBL-1-270 | 3.0 HP | 270 | 158 | -230 | 250 | 67 | 27 |
| YEBL-1-400 | 5.0 HP | 400 | 235 | -290 | 330 | 77 | 40 |
| YEBL-1-530 | 7.5 HP | 530 | 312 | -300 | 320 | 80 | 62 |
Match discharge pressure to tank depth and diffuser resistance; a PRV caps back-pressure through settle and decant phases. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Asia
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF your SE Asian port (or FOB Nhava Sheva)
- Ports
- Chittagong · Ho Chi Minh City · Jakarta · Bangkok · Port Klang · Colombo
- HS code
- 8414 — air/gas blowers, fans & compressors
Short transit from India's west coast keeps lead time in days, priced for high-volume regional sourcing.
Textiles
Air-jet weaving, yarn cleaning, humidification and dust extraction across the Bangladesh and Vietnam spinning and weaving base.
Plastics & PET
Material conveying, drying-hopper air, blow-moulding assist and vacuum handling at converters and bottle plants.
Aquaculture
Diffused-air aeration for Southeast Asian shrimp ponds and RAS fish systems — 24/7 dissolved-oxygen duty.
Printing & packaging
Vacuum for sheet-feeding, pick-and-place, laminating and pouch handling on regional machinery.
FAQSide Channel Blower for Effluent Treatment Plants — FAQs
Is the Side Channel Blower rated for continuous effluent treatment duty?
Yes — the recommended YEBL-1-270, YEBL-1-400, YEBL-1-530 are dynamically balanced and built for the 24/7 load that effluent treatment runs. The duty here is activated-sludge and SBR aeration on variable industrial load at 150–1,100 m³/hr / 250–650 mbar; the machine is selected to hold that point continuously, not just touch it on a test bench.
How is a Side Channel Blower sized for effluent treatment?
Sizing turns on two numbers — flow and pressure. Match discharge pressure to tank depth and diffuser resistance; a PRV caps back-pressure through settle and decant phases. On this duty most selections sit around 150–1,100 m³/hr at 250–650 mbar. Fix the duty point, add a design margin, and pick the smallest model that covers both; YEBL-1-270 and YEBL-1-400 are the usual starting points.
RFQ / Request for Quotation
Side Channel Blower for Effluent Treatment Plants in Asia?
Send your duty point (150–1,100 m³/hr at 250–650 mbar), site voltage and destination port — an engineer sizes the model and quotes CIF your SE Asian port (or FOB Nhava Sheva).