SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
Rotary Vane Vacuum Pump for Water Treatment Plants in United States
Rotary Vane Vacuum Pump sized for iron & manganese aeration and rapid-filter air scour — 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour — and built for the United States grid, climate and shipping route.
Choosing a rotary vane / liquid-ring vacuum pump for water treatment is a duty-point decision first and a logistics decision second; this page covers both for a shipment into United States. For water treatment, the controlling numbers are flow (200–3,300 m³/hr) and vacuum (100–350 mbar aeration / low-pressure air scour); Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties.
The United States grid is 60 Hz, 208 / 230 / 460 V (3-phase) three-phase — the machine is wound to match, and motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Start with YELVD-300 and move up or down the range as the duty demands; the full recommended set is YELVD-300, YELV-500, YELV-650.
MDLRecommended models
Rotary Vane Vacuum Pump — the fit for water treatment
Liquid-ring vacuum for degasification and priming duty — the ring seal handles the wet, saturated gas these services pull.
Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQRotary Vane Vacuum Pump for Water Treatment Plants — FAQs
How do you ship a Rotary Vane Vacuum Pump to United States?
Orders move FOB Nhava Sheva or CIF US ports, routed through your US port. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
Which Rotary Vane Vacuum Pump model do I need for water treatment in United States?
For a typical water treatment duty of 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour, start with YELVD-300 and step through YELVD-300, YELV-500, YELV-650 as the load rises. Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. Send us your exact flow and vacuum and an engineer confirms the model and quotes it FOB Nhava Sheva or CIF US ports.
RFQ / Request for Quotation
Rotary Vane Vacuum Pump for Water Treatment Plants in United States?
Send your duty point (200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.