SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)
Rotary Vane Vacuum Pump for Water Treatment Plants in Middle East
Rotary Vane Vacuum Pump sized for iron & manganese aeration and rapid-filter air scour — 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour — and built for the Middle East grid, climate and shipping route.
Buyers across the UAE, Saudi Arabia, Qatar, Oman and the Levant sourcing a rotary vane / liquid-ring vacuum pump for water treatment want the same envelope the premium brands occupy — at a landed cost Indian manufacturing can hold. Water Treatment Plants means iron & manganese aeration and rapid-filter air scour — plan for 200–3,300 m³/hr and 100–350 mbar aeration / low-pressure air scour, and pick the smallest model that covers both.
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. The supply is 50 Hz at 380–415 V (3-phase), and shipment is CIF Jebel Ali (or FOB Nhava Sheva). Any of YELVD-300, YELV-500, YELV-650 will suit a typical water treatment duty — tell us the numbers and we pin the exact model, price it CIF Jebel Ali (or FOB Nhava Sheva), and confirm lead time.
MDLRecommended models
Rotary Vane Vacuum Pump — the fit for water treatment
Liquid-ring vacuum for degasification and priming duty — the ring seal handles the wet, saturated gas these services pull.
Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Middle East
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Single-phase
- 220–240 V
- Incoterms
- CIF Jebel Ali (or FOB Nhava Sheva)
- Ports
- Jebel Ali · Dammam · Jeddah · Hamad · Sohar
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.
Sewage & STP aeration
Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.
Desalination & water treatment support
Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.
Aquaculture
Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.
Construction & cement
Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.
FAQRotary Vane Vacuum Pump for Water Treatment Plants — FAQs
How is a Rotary Vane Vacuum Pump sized for water treatment?
Sizing turns on two numbers — flow and vacuum. Aeration sits at 1–2 m head; the filter air-scour burst is high-flow at low pressure — two different machines for two duties. On this duty most selections sit around 200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour. Fix the duty point, add a design margin, and pick the smallest model that covers both; YELVD-300 and YELV-500 are the usual starting points.
Is the Rotary Vane Vacuum Pump rated for continuous water treatment duty?
Yes — the recommended YELVD-300, YELV-500, YELV-650 are dynamically balanced and built for the 24/7 load that water treatment runs. The duty here is iron & manganese aeration and rapid-filter air scour at 200–3,300 m³/hr / 100–350 mbar aeration / low-pressure air scour; the machine is selected to hold that point continuously, not just touch it on a test bench.
RFQ / Request for Quotation
Rotary Vane Vacuum Pump for Water Treatment Plants in Middle East?
Send your duty point (200–3,300 m³/hr at 100–350 mbar aeration / low-pressure air scour), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).