SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
Rotary Vane Vacuum Pump for Printing & Packaging in Africa
Rotary Vane Vacuum Pump sized for sheet-feeder vacuum hold-down and blow air — 80–300 m³/hr at 80–290 mbar vacuum and pressure — and built for the Africa grid, climate and shipping route.
A rotary vane / liquid-ring vacuum pump exported to Africa for printing and packaging has to do two jobs at once: hold its duty point on local power, and survive the conditions on site. Printing & Packaging runs on sheet-feeder vacuum hold-down and blow air; size for 80–300 m³/hr and 80–290 mbar vacuum and pressure, add a design margin, and the rotary vane / liquid-ring vacuum pump does the work without waste.
For a Africa destination the two fixed points are the 50 Hz grid and the route to Mombasa — CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva). Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites. For most printing and packaging projects in Africa the answer is one of YELVD-300, YELV-300, YELV-500 — confirm the duty and we quote the YELVD-300 or its neighbour firm.
MDLRecommended models
Rotary Vane Vacuum Pump — the fit for printing and packaging
Dedicated vacuum for suction-only duty — vacuum hold-down beds, screen exposure frames and delivery stacking where you do not need the blow side.
One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Africa
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
- Ports
- Mombasa · Dar es Salaam · Durban · Lagos · Tema
- HS code
- 8414 — air/gas blowers, fans & compressors
Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites.
Aquaculture
Diffused-air aeration for intensive tilapia, catfish and shrimp systems — holds dissolved oxygen in ponds, tanks and raceways across a fast-growing sector.
Mining & cement dust collection
Pressure and vacuum for pulse-jet baghouses and cartridge filters at crushers, transfer points, screens and bagging lines.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants as cities grow and effluent rules tighten — 24/7 rated machines.
Agriculture & food processing
Grain aeration, drying, and pneumatic conveying of flour, feed and granules in processing and packing lines.
FAQRotary Vane Vacuum Pump for Printing & Packaging — FAQs
Is the Rotary Vane Vacuum Pump rated for continuous printing and packaging duty?
Yes — the recommended YELVD-300, YELV-300, YELV-500 are dynamically balanced and built for the 24/7 load that printing and packaging runs. The duty here is sheet-feeder vacuum hold-down and blow air at 80–300 m³/hr / 80–290 mbar vacuum and pressure; the machine is selected to hold that point continuously, not just touch it on a test bench.
How is a Rotary Vane Vacuum Pump sized for printing and packaging?
Sizing turns on two numbers — flow and vacuum. One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. On this duty most selections sit around 80–300 m³/hr at 80–290 mbar vacuum and pressure. Fix the duty point, add a design margin, and pick the smallest model that covers both; YELVD-300 and YELV-300 are the usual starting points.
RFQ / Request for Quotation
Rotary Vane Vacuum Pump for Printing & Packaging in Africa?
Send your duty point (80–300 m³/hr at 80–290 mbar vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva).