SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
Oil-Free Vacuum Pump for Printing & Packaging in United States
Oil-Free Vacuum Pump sized for sheet-feeder vacuum hold-down and blow air — 80–300 m³/hr at 80–290 mbar vacuum and pressure — and built for the United States grid, climate and shipping route.
A oil-free dry vacuum pump exported to United States for printing and packaging has to do two jobs at once: hold its duty point on local power, and survive the conditions on site. The engineering point for printing and packaging is straightforward: One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. That puts most selections around 80–300 m³/hr at 80–290 mbar vacuum and pressure.
United States runs on 60 Hz at 208 / 230 / 460 V (3-phase); Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Below are the oil-free dry vacuum pumps that fit — YBDVP 10, YBDVP 25, YBDVP 40 — with the specs, vacuum and flow figures you need to choose. Send your duty point to confirm.
MDLRecommended models
Oil-Free Vacuum Pump — the fit for printing and packaging
Compact oil-free vacuum for clean hold-down and pick-and-place where an oil mist would mark the stock — no oil anywhere near the sheet.
One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQOil-Free Vacuum Pump for Printing & Packaging — FAQs
Which Oil-Free Vacuum Pump model do I need for printing and packaging in United States?
For a typical printing and packaging duty of 80–300 m³/hr at 80–290 mbar vacuum and pressure, start with YBDVP 10 and step through YBDVP 10, YBDVP 25, YBDVP 40 as the load rises. One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. Send us your exact flow and vacuum and an engineer confirms the model and quotes it FOB Nhava Sheva or CIF US ports.
How do you ship a Oil-Free Vacuum Pump to United States?
Orders move FOB Nhava Sheva or CIF US ports, routed through your US port. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
RFQ / Request for Quotation
Oil-Free Vacuum Pump for Printing & Packaging in United States?
Send your duty point (80–300 m³/hr at 80–290 mbar vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.