SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
Oil-Free Vacuum Pump for Plastics & PET Extrusion in United States
Oil-Free Vacuum Pump sized for hopper loading, PET drying air and vacuum sizing — 300–2,000 m³/hr at vacuum and pressure — and built for the United States grid, climate and shipping route.
Buyers across the United States sourcing a oil-free dry vacuum pump for plastics and PET extrusion want the same envelope the premium brands occupy — at a landed cost Indian manufacturing can hold. The plastics and PET extrusion duty here is hopper loading, PET drying air and vacuum sizing, typically 300–2,000 m³/hr at vacuum and pressure, and the oil-free dry vacuum pump is sized to sit inside that window with margin.
In United States, expect 60 Hz at 208 / 230 / 460 V (3-phase) and delivery FOB Nhava Sheva or CIF US ports. Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Pick from YBDVP 60, YBDVP 100, YBDVP 160 against your duty window, then let an engineer verify the selection at your exact vacuum, altitude and air temperature.
MDLRecommended models
Oil-Free Vacuum Pump — the fit for plastics and PET extrusion
Clean dry vacuum for central resin conveying headers and extruder vacuum-vent duty where an oil pump would foul on volatiles.
Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQOil-Free Vacuum Pump for Plastics & PET Extrusion — FAQs
Which Oil-Free Vacuum Pump model do I need for plastics and PET extrusion in United States?
For a typical plastics and PET extrusion duty of 300–2,000 m³/hr at vacuum and pressure, start with YBDVP 60 and step through YBDVP 60, YBDVP 100, YBDVP 160 as the load rises. Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. Send us your exact flow and vacuum and an engineer confirms the model and quotes it FOB Nhava Sheva or CIF US ports.
How do you ship a Oil-Free Vacuum Pump to United States?
Orders move FOB Nhava Sheva or CIF US ports, routed through your US port. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
RFQ / Request for Quotation
Oil-Free Vacuum Pump for Plastics & PET Extrusion in United States?
Send your duty point (300–2,000 m³/hr at vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.