SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
Oil-Free Vacuum Pump for Plastics & PET Extrusion in Europe
Oil-Free Vacuum Pump sized for hopper loading, PET drying air and vacuum sizing — 300–2,000 m³/hr at vacuum and pressure — and built for the Europe grid, climate and shipping route.
Oil-Free Vacuum Pump demand for plastics and PET extrusion in Europe is real and growing; the engineering question is only whether the machine holds its vacuum through local conditions and arrives without a three-month lead time. This is a hopper loading, PET drying air and vacuum sizing duty: Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure.
Europe runs on 50 Hz at 400 V (3-phase); Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. Below are the oil-free dry vacuum pumps that fit — YBDVP 60, YBDVP 100, YBDVP 160 — with the specs, vacuum and flow figures you need to choose. Send your duty point to confirm.
MDLRecommended models
Oil-Free Vacuum Pump — the fit for plastics and PET extrusion
Clean dry vacuum for central resin conveying headers and extruder vacuum-vent duty where an oil pump would foul on volatiles.
Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQOil-Free Vacuum Pump for Plastics & PET Extrusion — FAQs
How do you ship a Oil-Free Vacuum Pump to Europe?
Orders move FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp, routed through Rotterdam. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
Which Oil-Free Vacuum Pump model do I need for plastics and PET extrusion in Europe?
For a typical plastics and PET extrusion duty of 300–2,000 m³/hr at vacuum and pressure, start with YBDVP 60 and step through YBDVP 60, YBDVP 100, YBDVP 160 as the load rises. Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. Send us your exact flow and vacuum and an engineer confirms the model and quotes it FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.
RFQ / Request for Quotation
Oil-Free Vacuum Pump for Plastics & PET Extrusion in Europe?
Send your duty point (300–2,000 m³/hr at vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.