SOLSolution
50 Hz · 380–415 V (3-phase) · CIF your SE Asian port (or FOB Nhava Sheva)
Centrifugal Blower for Textile in Asia
Centrifugal Blower sized for pneumafil suction, fibre transport and humidification air — 1,200–6,000 m³/hr at moderate, high-flow — and built for the Asia grid, climate and shipping route.
Centrifugal Blower demand for textile spinning and weaving in Asia is real and growing; the engineering question is only whether the machine holds its airflow through local conditions and arrives without a three-month lead time. The textile spinning and weaving duty here is pneumafil suction, fibre transport and humidification air, typically 1,200–6,000 m³/hr at moderate, high-flow, and the centrifugal blower is sized to sit inside that window with margin.
Because Asia is a 50 Hz market, no frequency conversion is needed — the motor is wound for 380–415 V (3-phase) directly, and short transit from India's west coast keeps lead time in days, priced for high-volume regional sourcing. Below are the centrifugal blowers that fit — YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-200-15 — with the specs, airflow and flow figures you need to choose. Send your duty point to confirm.
MDLRecommended models
Centrifugal Blower — the fit for textile spinning and weaving
The core high-flow machine — pneumafil and travelling-cleaner suction, blow-room transport air and humidification supply at thousands of m³/hr.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
| YBCB-TBM-200-15 | 15 HP | 3900-5100 | 2295-3001 | 5000 | 6500 | 95/110 | 117 |
The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Asia
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF your SE Asian port (or FOB Nhava Sheva)
- Ports
- Chittagong · Ho Chi Minh City · Jakarta · Bangkok · Port Klang · Colombo
- HS code
- 8414 — air/gas blowers, fans & compressors
Short transit from India's west coast keeps lead time in days, priced for high-volume regional sourcing.
Textiles
Air-jet weaving, yarn cleaning, humidification and dust extraction across the Bangladesh and Vietnam spinning and weaving base.
Plastics & PET
Material conveying, drying-hopper air, blow-moulding assist and vacuum handling at converters and bottle plants.
Aquaculture
Diffused-air aeration for Southeast Asian shrimp ponds and RAS fish systems — 24/7 dissolved-oxygen duty.
Printing & packaging
Vacuum for sheet-feeding, pick-and-place, laminating and pouch handling on regional machinery.
FAQCentrifugal Blower for Textile — FAQs
What about spares and lead time for a Asia order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Asia that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
Will the Centrifugal Blower run on Asia power?
Yes. Units for Asia are wound for 50 Hz at 380–415 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Short transit from India's west coast keeps lead time in days, priced for high-volume regional sourcing. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
RFQ / Request for Quotation
Centrifugal Blower for Textile in Asia?
Send your duty point (1,200–6,000 m³/hr at moderate, high-flow), site voltage and destination port — an engineer sizes the model and quotes CIF your SE Asian port (or FOB Nhava Sheva).