SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)
Centrifugal Blower for Dust Collection in Middle East
Centrifugal Blower sized for baghouse / cartridge collector draft and pulse-jet cleaning — 1,200–6,000 m³/hr at 2,000–9,000 Pa static — and built for the Middle East grid, climate and shipping route.
When a dust collection contractor in Middle East asks Yash for a centrifugal blower, the quotation starts from the duty point and the 50 Hz supply — never from a catalogue number picked by guesswork. The engineering point for dust collection is straightforward: Static pressure climbs as the filter cake builds; pick a machine whose curve holds airflow across the full dirty-to-clean range. That puts most selections around 1,200–6,000 m³/hr at 2,000–9,000 Pa static.
Delivered to Middle East: 50 Hz at 380–415 V (3-phase), CIF Jebel Ali (or FOB Nhava Sheva), crated seaworthy under HS heading 8414. Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. Start with YBCB-CX-125A and move up or down the range as the duty demands; the full recommended set is YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-200-20.
MDLRecommended models
Centrifugal Blower — the fit for dust collection
The main collector fan for baghouse and cartridge systems — high m³/hr at moderate static, on a flat-ish curve that holds airflow as the cake builds.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (Pa) | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YBCB-CX-125A | 3.0 HP | 1950-2350 | 1130-1383 | 2400 | 3700 | 76/95 | 38 |
| YBCB-CX-150A | 5.0 HP | 2800-3300 | 1648-1942 | 3200 | 4400 | 80/100 | 54 |
| YBCB-TBM-200-20 | 20 HP | 5400-6000 | 3178-3531 | 5000 | 7000 | 95/110 | 130 |
Static pressure climbs as the filter cake builds; pick a machine whose curve holds airflow across the full dirty-to-clean range. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Middle East
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Single-phase
- 220–240 V
- Incoterms
- CIF Jebel Ali (or FOB Nhava Sheva)
- Ports
- Jebel Ali · Dammam · Jeddah · Hamad · Sohar
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.
Sewage & STP aeration
Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.
Desalination & water treatment support
Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.
Aquaculture
Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.
Construction & cement
Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.
FAQCentrifugal Blower for Dust Collection — FAQs
Is the Centrifugal Blower rated for continuous dust collection duty?
Yes — the recommended YBCB-CX-125A, YBCB-CX-150A, YBCB-TBM-200-20 are dynamically balanced and built for the 24/7 load that dust collection runs. The duty here is baghouse / cartridge collector draft and pulse-jet cleaning at 1,200–6,000 m³/hr / 2,000–9,000 Pa static; the machine is selected to hold that point continuously, not just touch it on a test bench.
How is a Centrifugal Blower sized for dust collection?
Sizing turns on two numbers — flow and airflow. Static pressure climbs as the filter cake builds; pick a machine whose curve holds airflow across the full dirty-to-clean range. On this duty most selections sit around 1,200–6,000 m³/hr at 2,000–9,000 Pa static. Fix the duty point, add a design margin, and pick the smallest model that covers both; YBCB-CX-125A and YBCB-CX-150A are the usual starting points.
RFQ / Request for Quotation
Centrifugal Blower for Dust Collection in Middle East?
Send your duty point (1,200–6,000 m³/hr at 2,000–9,000 Pa static), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).