01 / Family
CX-Series Centrifugal Blower (YBCB-CX)
Steady cooling air to hold moulding cycle times.
CLCables & Electrical
Sector solution / Electrical accessories
Air & Vacuum for the Cables & Electrical Sector
Switches, sockets and electrical accessories are a moulding-and-assembly business — thermoplastic injection at volume, then high-speed assembly and packing.
REQTypical duty requirements
Air & vacuum on an electrical-accessory line
| Duty | Character | Recommended class |
|---|---|---|
| Moulding cooling | Steady process air | CX centrifugal |
| Material drying / conveying | Low-pressure air | Turbine blower |
| Part feeding / fixturing | Oil-free vacuum | Dry vacuum pump |
| Blister / clamshell packing | Forming vacuum | Dry vacuum pump |
CTXWhat this sector runs
Injection moulding of accessory bodies and covers generates heat that cooling air has to remove to hold cycle times, and material drying and conveying feed the presses with air. These are steady centrifugal and turbine duties that set the pace of the moulding floor.
Assembly and packing add vacuum — holding small parts on fixtures, feeding components, and evacuating blister and clamshell packs. Because those parts are handled clean, oil-free vacuum is preferred. Reading the plant as cooling and conveying air plus oil-free handling vacuum is the recommended structure.
SOLRecommended Yash families
Our standard solution for the cables & electrical sector
ENGEngineering notes
Cooling holds the cycle
Injection moulding of accessory bodies is paced by how fast and evenly the mould and part shed heat, so cooling air is a direct lever on cycle time and output. A steady, balanced centrifugal keeps that cooling constant, so cycles do not lengthen as an unbalanced rotor's output creeps down. Specifying the cooling airflow and choosing an in-house-balanced CX machine keeps the moulding floor's output predictable across a shift rather than sagging toward the end of it.
Clean grip on small parts
Accessory assembly and packing feed and hold small parts on vacuum, and any oil residue shows on a finished consumer product. Oil-free vacuum keeps parts clean from feed to blister pack, and the duty is about steady grip on small areas rather than depth. Sizing the YBDVP to the fixture and feed demand, and keeping it oil-free, means the handling and packing vacuum never becomes the reason a finished switch or socket is marked.
Volume rewards a machine that runs
High-volume accessory moulding and packing reward machinery that simply keeps running, so the specification leans on reliability and easy service more than on any single performance figure. A cooling blower with a balanced rotor holds its output shift after shift, and an oil-free handling pump that is sized with margin does not sag as heads multiply on the header. Behind both, a domestic maker with common spares means a rebuild is days, not months. For a plant turning out switches and sockets by the million, that unglamorous dependability — steady cooling, clean vacuum, quick spares — is what protects the output number.
Anchor is a valued customer of Yash Blowers. Product recommendations on this page describe our standard solutions for the cable & electrical sector, not that company's specific installations.
WHYWhy Yash Blowers
High-volume moulding and packing reward machinery that runs and runs. Yash Blowers builds in Faridabad, since 1998, to ISO 9001:2015, with in-house impellers and 300+ daily dispatch — so cooling blowers and handling vacuum on an accessory line sit behind a fast Indian spares chain.
- Faridabad, India
- ISO 9001:2015
- In-house impellers
0+
Years building blowers
0+
Units dispatched daily
0%
Impellers cast in-house
FAQFrequently asked questions
Why does injection moulding need dedicated cooling air?
Because cycle time depends on removing heat from the mould and part predictably. A steady CX-series centrifugal blower holds that cooling airflow so cycles stay consistent across a shift.
Why oil-free vacuum for small-part handling?
So accessory parts stay clean for assembly and packing. Oil-free YBDVP pumps feed and hold small parts without leaving residue that would show on a finished product.
RFQ / Request for Quotation
Sizing air or vacuum for cables & electrical?
Send your duty point — flow and pressure, or the vacuum you need — and an engineer sizes the right model and quotes ex-works Faridabad, FOB Nhava Sheva or CIF your port.