SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
High Pressure Blower for Plastics & PET Extrusion in Africa
High Pressure Blower sized for hopper loading, PET drying air and vacuum sizing — 300–2,000 m³/hr at vacuum and pressure — and built for the Africa grid, climate and shipping route.
The right high-pressure centrifugal blower for a plastics and PET extrusion duty in Africa is the one whose pressure and flow match the process; everything else — voltage, crating, documentation — follows from the destination. The plastics and PET extrusion job is hopper loading, PET drying air and vacuum sizing. Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure.
Delivered to Africa: 50 Hz at 380–415 V (3-phase), CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva), crated seaworthy under HS heading 8414. Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites. Recommended fits are YBCB-HP-919-4.0, YBCB-HP-919-5.5, YBCB-HP-919-7.5; send flow, pressure, site voltage and destination port and the quote comes back firm.
MDLRecommended models
High Pressure Blower — the fit for plastics and PET extrusion
High-volume air for blown-film air rings, de-dusting and post-cutter cooling where flow matters and static must still be held.
| Model | Power | Air flow | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|
| YBCB-HP-919-4.0 | 4KW/5 HP | 1174-2062 m3/hr | 4003-4447 PA | 95 | 87 |
| YBCB-HP-919-5.5 | 5.5KW / 7.5 HP | 2500-3750 m3/hr | 3852-3407 PA | 95 | 108 |
| YBCB-HP-919-7.5 | 7.5KW/10 HP | 3130-3680 m3/hr | 4910-4776 PA | 98 | 133 |
Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Africa
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva)
- Ports
- Mombasa · Dar es Salaam · Durban · Lagos · Tema
- HS code
- 8414 — air/gas blowers, fans & compressors
Genset-ready builds for unstable grid power, robust filtration for dust and heat, and an in-house spares pipeline for remote sites.
Aquaculture
Diffused-air aeration for intensive tilapia, catfish and shrimp systems — holds dissolved oxygen in ponds, tanks and raceways across a fast-growing sector.
Mining & cement dust collection
Pressure and vacuum for pulse-jet baghouses and cartridge filters at crushers, transfer points, screens and bagging lines.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants as cities grow and effluent rules tighten — 24/7 rated machines.
Agriculture & food processing
Grain aeration, drying, and pneumatic conveying of flour, feed and granules in processing and packing lines.
FAQHigh Pressure Blower for Plastics & PET Extrusion — FAQs
How do you ship a High Pressure Blower to Africa?
Orders move CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva), routed through Mombasa. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
Which High Pressure Blower model do I need for plastics and PET extrusion in Africa?
For a typical plastics and PET extrusion duty of 300–2,000 m³/hr at vacuum and pressure, start with YBCB-HP-919-4.0 and step through YBCB-HP-919-4.0, YBCB-HP-919-5.5, YBCB-HP-919-7.5 as the load rises. Central conveying headers and vacuum sizing tanks need held head; cooling and air-ring duty needs volume at modest back-pressure. Send us your exact flow and pressure and an engineer confirms the model and quotes it CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva).
RFQ / Request for Quotation
High Pressure Blower for Plastics & PET Extrusion in Africa?
Send your duty point (300–2,000 m³/hr at vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes CIF Mombasa / Durban / Lagos (or FOB Nhava Sheva).