01 / Family
High Pressure Centrifugal Blower (YBCB-HP-919)
High-static-pressure air for paint booths, ovens and dust extraction.
CLAutomotive & Engineering
Sector solution / Tractors & engines
Air & Vacuum for the Automotive & Engineering Sector
Tractor and engine manufacturing stacks heavy machining, casting and paint under one roof — every one of those carries a distinct air or vacuum duty.
CTXWhat this sector runs
Machining lines throw swarf and coolant mist that extraction air has to clear, and the paint shop needs high-pressure supply and exhaust for booths and ovens. Where a plant casts or heat-treats, dust and fume handling widen the centrifugal air load further. These are continuous, high-static-pressure duties.
Vacuum shows up on the handling and machining side — clamping and fixturing components, lifting castings and panels, and evacuating chip-laden zones. Reading the plant as high-pressure centrifugal air for paint and dust, plus vacuum for clamping and lifting, is the recommended structure for an engineering works.
SOLRecommended Yash families
Our standard solution for the automotive & engineering sector
ENGEngineering notes
Machinery built to be rebuilt
Heavy engineering is hard on rotating machinery, so the sensible question at purchase is how easily a machine can be rebuilt and re-supplied. In-house impeller casting and balancing means wear parts and replacement rotors come from the same works that built the machine, on a domestic timeline. For a tractor or engine line, that turns a potential multi-month import wait into a domestic order — which is why the ability to rebuild locally weighs as heavily as the initial duty match.
Chip clearing at the cell
Machining cells throw swarf that has to be cleared without contaminating the part, which pairs a vacuum grip for fixturing with a blow-off jet for clearing. A single oil-free vacuum-and-pressure machine does both, keeping the part clean before the next operation. Sizing follows the fixture area and the clearing-air demand together; the recommended YBVP class supplies clamping vacuum and blow-off from one unit, avoiding two machines where one will do and keeping oil away from finished surfaces.
Rebuildable heavy machinery
Heavy engineering wears rotating machinery, so the sensible purchase question is how easily a machine is rebuilt and re-supplied. In-house impeller casting and balancing means wear parts and replacement rotors come from the same works that built the machine, on a domestic timeline, turning a potential import wait into a domestic order. Sizing paint and dust blowers with static-pressure margin, and lifting vacuum for the heaviest casting, gives headroom before wear bites. On a tractor and engine line, machinery that can be rebuilt locally is machinery that stays in service — which weighs as heavily as the initial duty match.
REQTypical duty requirements
Air & vacuum across a tractor / engine works
| Shop | Duty | Recommended class |
|---|---|---|
| Paint booths & ovens | High-pressure air | HP centrifugal |
| Machining fume / dust | Continuous extraction | Centrifugal blower |
| Component clamping / fixtures | Vacuum hold-down | Dry vacuum pump |
| Casting / panel lifting | Vacuum, higher capacity | Vacuum pump |
Kubota is a valued customer of Yash Blowers. Product recommendations on this page describe our standard solutions for the automotive & engineering sector, not that company's specific installations.
WHYWhy Yash Blowers
Heavy engineering rewards machinery built to be rebuilt. Yash Blowers has cast and balanced its own impellers in Faridabad since 1998, under ISO 9001:2015, and dispatches 300+ machines a day, so a paint blower or a lifting-vacuum pump on a tractor line is serviced from an Indian works with spares on the shelf rather than in a container.
- Faridabad, India
- ISO 9001:2015
- In-house impellers
0+
Years building blowers
0+
Units dispatched daily
0%
Impellers cast in-house
FAQFrequently asked questions
What clears swarf and coolant mist on machining cells?
Centrifugal extraction air, and often a vacuum-with-blow-off machine at the cell for chip clearing. The recommendation pairs a centrifugal blower for the extraction header with a YBVP oil-free machine at the point of work.
What lifts heavy castings safely?
Vacuum lifting sized for the mass and surface. Heavy castings demand a higher-capacity pump that holds vacuum under load, which is why the YELV class is recommended for casting and panel handling.
RFQ / Request for Quotation
Sizing air or vacuum for automotive & engineering?
Send your duty point — flow and pressure, or the vacuum you need — and an engineer sizes the right model and quotes ex-works Faridabad, FOB Nhava Sheva or CIF your port.