SOLSolution
50 Hz · 380–415 V (3-phase) · CIF your SE Asian port (or FOB Nhava Sheva)
High Pressure Blower for Electroplating in Asia
High Pressure Blower sized for oil-free plating-bath air agitation and fume exhaust — 145–1,450 m³/hr at 100–300 mbar agitation — and built for the Asia grid, climate and shipping route.
Choosing a high-pressure centrifugal blower for electroplating is a duty-point decision first and a logistics decision second; this page covers both for a shipment into Asia. In electroplating, the high-pressure centrifugal blower carries the oil-free plating-bath air agitation and fume exhaust load — 145–1,450 m³/hr at 100–300 mbar agitation is the band most sites land in.
Because Asia is a 50 Hz market, no frequency conversion is needed — the motor is wound for 380–415 V (3-phase) directly, and short transit from India's west coast keeps lead time in days, priced for high-volume regional sourcing. Any of YBCB-HP-919-2.2, YBCB-HP-919-4.0, YBCB-HP-919-5.5 will suit a typical electroplating duty — tell us the numbers and we pin the exact model, price it CIF your SE Asian port (or FOB Nhava Sheva), and confirm lead time.
MDLRecommended models
High Pressure Blower — the fit for electroplating
For exhaust systems with long duct runs, tall scrubber packing or high static, where a general centrifugal runs out of head to hold capture velocity at the lip.
| Model | Power | Air flow | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|
| YBCB-HP-919-2.2 | 2.2KW / 3 HP | 824-1264 m3/hr | 3584-3297 PA | 91 | 62 |
| YBCB-HP-919-4.0 | 4KW/5 HP | 1174-2062 m3/hr | 4003-4447 PA | 95 | 87 |
| YBCB-HP-919-5.5 | 5.5KW / 7.5 HP | 2500-3750 m3/hr | 3852-3407 PA | 95 | 108 |
A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Asia
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Incoterms
- CIF your SE Asian port (or FOB Nhava Sheva)
- Ports
- Chittagong · Ho Chi Minh City · Jakarta · Bangkok · Port Klang · Colombo
- HS code
- 8414 — air/gas blowers, fans & compressors
Short transit from India's west coast keeps lead time in days, priced for high-volume regional sourcing.
Textiles
Air-jet weaving, yarn cleaning, humidification and dust extraction across the Bangladesh and Vietnam spinning and weaving base.
Plastics & PET
Material conveying, drying-hopper air, blow-moulding assist and vacuum handling at converters and bottle plants.
Aquaculture
Diffused-air aeration for Southeast Asian shrimp ponds and RAS fish systems — 24/7 dissolved-oxygen duty.
Printing & packaging
Vacuum for sheet-feeding, pick-and-place, laminating and pouch handling on regional machinery.
FAQHigh Pressure Blower for Electroplating — FAQs
How do I get a firm price for a High Pressure Blower into Asia?
Send five things: the duty point (flow and pressure), the site voltage and phase, the quantity, the destination port and your preferred Incoterms. We confirm the 50 Hz model from YBCB-HP-919-2.2, YBCB-HP-919-4.0, YBCB-HP-919-5.5, the CIF price, the lead time and the container loading — a quote in 24 hours.
Why a High Pressure Blower for electroplating rather than another machine?
Because electroplating is oil-free plating-bath air agitation and fume exhaust, the high-pressure centrifugal blower is the right machine class for the 100–300 mbar agitation duty — it holds the point continuously without being an oversized compromise. Models YBCB-HP-919-2.2, YBCB-HP-919-4.0, YBCB-HP-919-5.5 cover the usual range.
RFQ / Request for Quotation
High Pressure Blower for Electroplating in Asia?
Send your duty point (145–1,450 m³/hr at 100–300 mbar agitation), site voltage and destination port — an engineer sizes the model and quotes CIF your SE Asian port (or FOB Nhava Sheva).