SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
High Pressure Blower for Dust Collection in United States
High Pressure Blower sized for baghouse / cartridge collector draft and pulse-jet cleaning — 1,200–6,000 m³/hr at 2,000–9,000 Pa static — and built for the United States grid, climate and shipping route.
High Pressure Blower demand for dust collection in United States is real and growing; the engineering question is only whether the machine holds its pressure through local conditions and arrives without a three-month lead time. The process asks for baghouse / cartridge collector draft and pulse-jet cleaning, so the high-pressure centrifugal blower is chosen for a 2,000–9,000 Pa static duty at 1,200–6,000 m³/hr rather than a headline figure.
The United States build is specified for 60 Hz / 208 / 230 / 460 V (3-phase) and ships FOB Nhava Sheva or CIF US ports via your US port. Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Recommended fits are YBCB-HP-919-5.5, YBCB-HP-919-7.5, YBCB-HP-919-11; send flow, pressure, site voltage and destination port and the quote comes back firm.
MDLRecommended models
High Pressure Blower — the fit for dust collection
Higher static headroom for long duct runs, deep filters and pulse-jet cleaning supply where a standard centrifugal fan runs out of pressure.
| Model | Power | Air flow | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|
| YBCB-HP-919-5.5 | 5.5KW / 7.5 HP | 2500-3750 m3/hr | 3852-3407 PA | 95 | 108 |
| YBCB-HP-919-7.5 | 7.5KW/10 HP | 3130-3680 m3/hr | 4910-4776 PA | 98 | 133 |
| YBCB-HP-919-11 | 11KW/15 HP | 2622-3619 m3/hr | 7182-7019 PA | 99 | 169 |
Static pressure climbs as the filter cake builds; pick a machine whose curve holds airflow across the full dirty-to-clean range. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQHigh Pressure Blower for Dust Collection — FAQs
Will the High Pressure Blower run on United States power?
Yes. Units for United States are wound for 60 Hz at 208 / 230 / 460 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.
What about spares and lead time for a United States order?
Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For United States that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.
RFQ / Request for Quotation
High Pressure Blower for Dust Collection in United States?
Send your duty point (1,200–6,000 m³/hr at 2,000–9,000 Pa static), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.