01 / Family
CX-Series Centrifugal Blower (YBCB-CX)
Cooling and extraction air for die-cast and machining cells.
CLAutomotive & Engineering
Sector solution / Auto components & castings
Air & Vacuum for the Automotive & Engineering Sector
Auto-component makers run aluminium die-casting, machining and assembly at pace — a mix that puts high-pressure air on the process floor and vacuum on the handling side.
REQTypical duty requirements
Air & vacuum on an auto-component line
| Process | Duty | Recommended class |
|---|---|---|
| Die-casting extraction / cooling | Continuous air | Centrifugal blower |
| Machining dust / fume | Extraction air | HP centrifugal |
| Part clamping & de-stacking | Vacuum, high cycle | Dry vacuum pump |
| Coating booth supply | High-pressure air | HP centrifugal |
CTXWhat this sector runs
Die-casting and machining generate heat, fume and fine metal dust; centrifugal air handles the extraction and the cooling that keeps cells within tolerance. Where components are coated, paint booths add their own high-pressure supply-and-exhaust duty. These run continuously and demand steady static pressure.
Machined and cast parts are held, lifted and de-stacked on vacuum through the cell and onto assembly — moderate-vacuum, high-cycle work. The recommended reading of a component plant is centrifugal air for die-cast and machining extraction, with vacuum for clamping and part handling.
SOLRecommended Yash families
Our standard solution for the automotive & engineering sector
02 / Family
High Pressure Centrifugal Blower (YBCB-HP-919)
High-static-pressure air for machining dust and coating booths.
03 / Family
Dry Vacuum Pump — Vacuum & Pressure (YBVP)
Oil-free clamping vacuum with blow-off for part handling.
ENGEngineering notes
Thermal control on die-cast cells
Aluminium die-casting is a thermal process, and dimensional consistency depends on holding cell temperature steady shift to shift. Cooling and extraction air is the lever, so the blower has to deliver constant airflow — a drifting fan means drifting dimensions. A dynamically balanced CX machine holds that airflow without the vibration and output creep of an unbalanced rotor, which is why in-house-balanced centrifugals are recommended for die-cast cooling where tolerance is measured in microns.
Handling parts clean
Cast and machined components are gripped, lifted and de-stacked on vacuum through the cell and onto assembly, and any oil residue from the grip shows up later as a coating or bonding defect. Oil-free vacuum with blow-off keeps surfaces clean while clearing chips off the fixture. Sizing to the fixture area and cycle rate, and choosing the YBVP class for its clean grip-and-clear, keeps the handling duty from contaminating parts that OEM inspection will scrutinise.
OEM schedules leave no slack
An auto-component plant supplies OEMs to tight schedules, so its air machinery has to be as dependable as its presses. That pushes the specification toward steady, balanced cooling blowers that hold die-cast cells in tolerance, oil-free handling vacuum that keeps parts clean, and a domestic spares chain that turns a rebuild around in days. Sizing each duty with margin means the air system does not become the reason a shipment slips. For a tier supplier whose delivery performance is watched by its customer, the reliability of the cooling and handling machinery is not a back-office detail — it is part of the delivery promise.
Rico Auto is a valued customer of Yash Blowers. Product recommendations on this page describe our standard solutions for the automotive & engineering sector, not that company's specific installations.
WHYWhy Yash Blowers
Component plants supply OEMs on tight schedules, so their air machinery has to be as dependable as the presses. Yash Blowers builds in Faridabad, since 1998, to ISO 9001:2015, with in-house impeller casting and 300+ daily dispatch — meaning die-cast cooling blowers and handling-vacuum pumps sit behind a fast Indian spares chain.
- Faridabad, India
- ISO 9001:2015
- In-house impellers
0+
Years building blowers
0+
Units dispatched daily
0%
Impellers cast in-house
FAQFrequently asked questions
What keeps die-casting cells within tolerance?
Steady cooling and extraction air. Thermal drift affects dimensions, so the recommendation is a centrifugal blower — the CX series — sized to hold the cell's air balance continuously.
Why oil-free vacuum for part clamping?
So machined surfaces stay clean before assembly or coating. An oil-free YBVP machine provides clamping vacuum and blow-off for chip clearing without leaving residue on parts.
RFQ / Request for Quotation
Sizing air or vacuum for automotive & engineering?
Send your duty point — flow and pressure, or the vacuum you need — and an engineer sizes the right model and quotes ex-works Faridabad, FOB Nhava Sheva or CIF your port.