SOLSolution
50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)
Side Channel Blower for Vacuum Conveying in Middle East
Side Channel Blower sized for dilute-phase pneumatic vacuum conveying — 200–1,050 m³/hr at 150–500 mbar vacuum — and built for the Middle East grid, climate and shipping route.
The side channel blower is the natural choice for vacuum conveying, and for Middle East the selection turns on 50 Hz power, destination Incoterms and the site environment. The engineering point for vacuum conveying is straightforward: Line length and vertical lift set the vacuum; conveying rate sets the airflow. Deeper vacuum keeps material entrained to the receiver. That puts most selections around 200–1,050 m³/hr at 150–500 mbar vacuum.
Shipped to Middle East, the unit is built for 50 Hz / 380–415 V (3-phase) and moves CIF Jebel Ali (or FOB Nhava Sheva). Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. The shortlist below (YEBL-1-320V, YEBL-1-530, YEBL-1-700) is a starting point — real load figures turn it into a firm selection and a quote in 24 hours.
MDLRecommended models
Side Channel Blower — the fit for vacuum conveying
The default vacuum source for short-to-medium dilute-phase conveying in the 150–350 mbar range — one impeller, one filter to service.
| Model | Power | Flow (m³/hr) | Flow (CFM) | Vacuum (mbar) | Pressure (mbar) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| YEBL-1-320V | 4.0 HP | 320 | 188 | -270 | 290 | 69 | 37 |
| YEBL-1-530 | 7.5 HP | 530 | 312 | -300 | 320 | 80 | 62 |
| YEBL-1-700 | 7.5 HP | 700 | 412 | -200 | 180 | 81 | 66 |
Line length and vertical lift set the vacuum; conveying rate sets the airflow. Deeper vacuum keeps material entrained to the receiver. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Middle East
- Frequency
- 50 Hz
- Three-phase voltage
- 380–415 V (3-phase)
- Single-phase
- 220–240 V
- Incoterms
- CIF Jebel Ali (or FOB Nhava Sheva)
- Ports
- Jebel Ali · Dammam · Jeddah · Hamad · Sohar
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.
Sewage & STP aeration
Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.
Desalination & water treatment support
Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.
Aquaculture
Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.
Construction & cement
Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.
FAQSide Channel Blower for Vacuum Conveying — FAQs
Why a Side Channel Blower for vacuum conveying rather than another machine?
Because vacuum conveying is dilute-phase pneumatic vacuum conveying, the side channel blower is the right machine class for the 150–500 mbar vacuum duty — it holds the point continuously without being an oversized compromise. Models YEBL-1-320V, YEBL-1-530, YEBL-1-700 cover the usual range.
How do I get a firm price for a Side Channel Blower into Middle East?
Send five things: the duty point (flow and pressure), the site voltage and phase, the quantity, the destination port and your preferred Incoterms. We confirm the 50 Hz model from YEBL-1-320V, YEBL-1-530, YEBL-1-700, the CIF price, the lead time and the container loading — a quote in 24 hours.
RFQ / Request for Quotation
Side Channel Blower for Vacuum Conveying in Middle East?
Send your duty point (200–1,050 m³/hr at 150–500 mbar vacuum), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).