SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
High Pressure Blower for Textile in United States
High Pressure Blower sized for pneumafil suction, fibre transport and humidification air — 1,200–6,000 m³/hr at moderate, high-flow — and built for the United States grid, climate and shipping route.
Yash exports the high-pressure centrifugal blower into United States for textile spinning and weaving the same way it builds for India — cast, machined and dynamically balanced in-house under an ISO 9001:2015 system — with the 60 Hz and Incoterm details handled for the destination. Textile means pneumafil suction, fibre transport and humidification air — plan for 1,200–6,000 m³/hr and moderate, high-flow, and pick the smallest model that covers both.
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Grid is 60 Hz, 208 / 230 / 460 V (3-phase), and the shipment clears FOB Nhava Sheva or CIF US ports. The models to look at are YBCB-HP-919-5.5, YBCB-HP-919-7.5, YBCB-HP-919-11; the sizing table and spec figures below get you into the right ballpark before you ask for a quotation.
MDLRecommended models
High Pressure Blower — the fit for textile spinning and weaving
The 919-frame machine for the higher-pressure end of the volume duties — extended humidification ducting or transport lines short of static.
| Model | Power | Air flow | Pressure (Pa) | Noise (dB) | Weight (kg) |
|---|---|---|---|---|---|
| YBCB-HP-919-5.5 | 5.5KW / 7.5 HP | 2500-3750 m3/hr | 3852-3407 PA | 95 | 108 |
| YBCB-HP-919-7.5 | 7.5KW/10 HP | 3130-3680 m3/hr | 4910-4776 PA | 98 | 133 |
| YBCB-HP-919-11 | 11KW/15 HP | 2622-3619 m3/hr | 7182-7019 PA | 99 | 169 |
The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQHigh Pressure Blower for Textile — FAQs
Which High Pressure Blower model do I need for textile spinning and weaving in United States?
For a typical textile spinning and weaving duty of 1,200–6,000 m³/hr at moderate, high-flow, start with YBCB-HP-919-5.5 and step through YBCB-HP-919-5.5, YBCB-HP-919-7.5, YBCB-HP-919-11 as the load rises. The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping. Send us your exact flow and pressure and an engineer confirms the model and quotes it FOB Nhava Sheva or CIF US ports.
How do you ship a High Pressure Blower to United States?
Orders move FOB Nhava Sheva or CIF US ports, routed through your US port. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
RFQ / Request for Quotation
High Pressure Blower for Textile in United States?
Send your duty point (1,200–6,000 m³/hr at moderate, high-flow), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.