Skip to content
Yash BlowersYash Blowers

SOLSolution

50 Hz · 380–415 V (3-phase) · CIF Jebel Ali (or FOB Nhava Sheva)

High Pressure Blower for Electroplating in Middle East

High Pressure Blower sized for oil-free plating-bath air agitation and fume exhaust — 145–1,450 m³/hr at 100–300 mbar agitation — and built for the Middle East grid, climate and shipping route.

High Pressure Blower demand for electroplating in Middle East is real and growing; the engineering question is only whether the machine holds its pressure through local conditions and arrives without a three-month lead time. This is a oil-free plating-bath air agitation and fume exhaust duty: A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss.

Delivered to Middle East: 50 Hz at 380–415 V (3-phase), CIF Jebel Ali (or FOB Nhava Sheva), crated seaworthy under HS heading 8414. Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. The shortlist below (YBCB-HP-919-2.2, YBCB-HP-919-4.0, YBCB-HP-919-5.5) is a starting point — real load figures turn it into a firm selection and a quote in 24 hours.

MDLRecommended models

High Pressure Blower — the fit for electroplating

High Pressure Centrifugal Blower

For exhaust systems with long duct runs, tall scrubber packing or high static, where a general centrifugal runs out of head to hold capture velocity at the lip.

Recommended High Pressure Centrifugal Blower models for this duty
ModelPowerAir flowPressure (Pa)Noise (dB)Weight (kg)
YBCB-HP-919-2.22.2KW / 3 HP824-1264 m3/hr3584-3297 PA9162
YBCB-HP-919-4.04KW/5 HP1174-2062 m3/hr4003-4447 PA9587
YBCB-HP-919-5.55.5KW / 7.5 HP2500-3750 m3/hr3852-3407 PA95108

A 0.8–1.5 m bath needs clean 100–200 mbar air at the sparger; fume exhaust is a separate high-flow duty against hood and scrubber loss. Indicative only — final selection depends on your exact duty point, altitude and air temperature.

EXPBuilding for Middle East

Frequency
50 Hz
Three-phase voltage
380–415 V (3-phase)
Single-phase
220–240 V
Incoterms
CIF Jebel Ali (or FOB Nhava Sheva)
Ports
Jebel Ali · Dammam · Jeddah · Hamad · Sohar
HS code
8414 — air/gas blowers, fans & compressors

Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea.

Sewage & STP aeration

Continuous diffused-air aeration for sewage treatment plants across new urban districts — the single biggest blower pull in the region.

Desalination & water treatment support

Aeration, degassing and pneumatic duty supporting desalination and municipal water treatment plants along the coast.

Aquaculture

Diffused-air aeration for a growing Gulf aquaculture sector holding dissolved oxygen in intensive ponds and tanks.

Construction & cement

Pneumatic conveying and dust-handling for construction and cement plants — inlet filtration specified against fine abrasive dust; also serves oilfield-adjacent utility duty.

FAQHigh Pressure Blower for Electroplating — FAQs

Will the High Pressure Blower run on Middle East power?

Yes. Units for Middle East are wound for 50 Hz at 380–415 V (3-phase), so the machine hits its rated duty point on your supply without a frequency conversion. Motors are de-rated for 45–50 °C ambient and coastal corrosion protection is specified where the site sits near the sea. Confirm your exact site voltage and phase on the enquiry and the build is matched to it.

What about spares and lead time for a Middle East order?

Yash casts impellers and makes filters and pressure-relief valves in-house, so the spare you need in two years is the same part on the same drawing. For Middle East that means a predictable chain — fast movers held regionally, the rest by air freight — and a firm lead time confirmed with the quote. Ask for a spares package matched to your duty cycle.

RFQ / Request for Quotation

High Pressure Blower for Electroplating in Middle East?

Send your duty point (145–1,450 m³/hr at 100–300 mbar agitation), site voltage and destination port — an engineer sizes the model and quotes CIF Jebel Ali (or FOB Nhava Sheva).

WhatsApp