SOLSolution
50 Hz · 400 V (3-phase) · FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
Rotary Vane Vacuum Pump for Textile in Europe
Rotary Vane Vacuum Pump sized for pneumafil suction, fibre transport and humidification air — 1,200–6,000 m³/hr at moderate, high-flow — and built for the Europe grid, climate and shipping route.
The rotary vane / liquid-ring vacuum pump is the natural choice for textile spinning and weaving, and for Europe the selection turns on 50 Hz power, destination Incoterms and the site environment. Because textile spinning and weaving is pneumafil suction, fibre transport and humidification air, the machine must hold its duty continuously — 1,200–6,000 m³/hr at moderate, high-flow — not just touch it on a test bench.
Power in Europe is 50 Hz / 400 V (3-phase); confirm the exact site voltage and the rotary vane / liquid-ring vacuum pump hits its rated duty on your supply. Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request. For most textile spinning and weaving projects in Europe the answer is one of YELV-500, YELV-650, YELV-1000 — confirm the duty and we quote the YELV-500 or its neighbour firm.
MDLRecommended models
Rotary Vane Vacuum Pump — the fit for textile spinning and weaving
Point-of-use vacuum for slasher-size boxes, dewatering and fixed machine-cleaning points that need real vacuum at small flow.
The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for Europe
- Frequency
- 50 Hz
- Three-phase voltage
- 400 V (3-phase)
- Incoterms
- FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp
- Ports
- Rotterdam · Hamburg · Antwerp
- HS code
- 8414 — air/gas blowers, fans & compressors
Built to 50 Hz / 400 V with CE-readiness documentation and test certificates supplied on request.
OEM machine builders (Germany / Italy)
Component and private-label supply to builders designing blowers into packaging, conveying and process machines — to drawing, revision and nameplate.
Municipal wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines meeting steady EU-driven demand.
RAS & indoor aquaculture
Diffused-air aeration to hold dissolved oxygen in intensive recirculating systems — a fast-growing Northern European market.
Plastics & packaging
Vacuum and low-pressure air for material handling, drying and pick-and-place in processing plants.
FAQRotary Vane Vacuum Pump for Textile — FAQs
Which Rotary Vane Vacuum Pump model do I need for textile spinning and weaving in Europe?
For a typical textile spinning and weaving duty of 1,200–6,000 m³/hr at moderate, high-flow, start with YELV-500 and step through YELV-500, YELV-650, YELV-1000 as the load rises. The mill runs on volume — thousands of m³/hr at moderate pressure on a broad, stable curve — with point-of-use vacuum for stripping. Send us your exact flow and vacuum and an engineer confirms the model and quotes it FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.
How do you ship a Rotary Vane Vacuum Pump to Europe?
Orders move FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp, routed through Rotterdam. Units are palletised and packed in seaworthy, ISPM-15 heat-treated wooden crates and declared under HS heading 8414. Commercial documents, certificate of origin and per-unit test certificates travel with the shipment on request; spares can follow by air freight.
RFQ / Request for Quotation
Rotary Vane Vacuum Pump for Textile in Europe?
Send your duty point (1,200–6,000 m³/hr at moderate, high-flow), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF Rotterdam / Hamburg / Antwerp.