SOLSolution
60 Hz · 208 / 230 / 460 V (3-phase) · FOB Nhava Sheva or CIF US ports
Rotary Vane Vacuum Pump for Printing & Packaging in United States
Rotary Vane Vacuum Pump sized for sheet-feeder vacuum hold-down and blow air — 80–300 m³/hr at 80–290 mbar vacuum and pressure — and built for the United States grid, climate and shipping route.
Sizing a rotary vane / liquid-ring vacuum pump for printing and packaging is an exercise in vacuum and flow — and for a United States project the build is then adjusted to the grid, ambient and shipping route. The printing and packaging job is sheet-feeder vacuum hold-down and blow air. One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail.
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply. Grid is 60 Hz, 208 / 230 / 460 V (3-phase), and the shipment clears FOB Nhava Sheva or CIF US ports. The shortlist below (YELVD-300, YELV-300, YELV-500) is a starting point — real load figures turn it into a firm selection and a quote in 24 hours.
MDLRecommended models
Rotary Vane Vacuum Pump — the fit for printing and packaging
Dedicated vacuum for suction-only duty — vacuum hold-down beds, screen exposure frames and delivery stacking where you do not need the blow side.
One machine taps vacuum on the inlet for the suckers and feed table and pressure on the outlet for the blow rail. Indicative only — final selection depends on your exact duty point, altitude and air temperature.
EXPBuilding for United States
- Frequency
- 60 Hz
- Three-phase voltage
- 208 / 230 / 460 V (3-phase)
- Single-phase
- 115 / 230 V
- Incoterms
- FOB Nhava Sheva or CIF US ports
- Ports
- US east coast · US west coast
- HS code
- 8414 — air/gas blowers, fans & compressors
Motors are wound for 60 Hz at US voltages — a 50 Hz machine would overspeed ~20% and run past its rating on US supply.
Aquaculture & RAS
Diffused-air aeration for domestic shrimp, RAS fish farms and pond systems — a fast-growing US market.
Municipal & industrial wastewater
Continuous aeration-basin and diffuser duty at treatment plants — 24/7 rated machines.
Pneumatic conveying
Vacuum and pressure conveying of powders, pellets and granules in processing plants.
OEM & packaging
Vacuum for pick-and-place, packaging and printing machinery built by US OEMs.
FAQRotary Vane Vacuum Pump for Printing & Packaging — FAQs
How do I get a firm price for a Rotary Vane Vacuum Pump into United States?
Send five things: the duty point (flow and vacuum), the site voltage and phase, the quantity, the destination port and your preferred Incoterms. We confirm the 60 Hz model from YELVD-300, YELV-300, YELV-500, the CIF price, the lead time and the container loading — a quote in 24 hours.
Why a Rotary Vane Vacuum Pump for printing and packaging rather than another machine?
Because printing and packaging is sheet-feeder vacuum hold-down and blow air, the rotary vane / liquid-ring vacuum pump is the right machine class for the 80–290 mbar vacuum and pressure duty — it holds the point continuously without being an oversized compromise. Models YELVD-300, YELV-300, YELV-500 cover the usual range.
RFQ / Request for Quotation
Rotary Vane Vacuum Pump for Printing & Packaging in United States?
Send your duty point (80–300 m³/hr at 80–290 mbar vacuum and pressure), site voltage and destination port — an engineer sizes the model and quotes FOB Nhava Sheva or CIF US ports.